Speed: Fill the 300ml tank with water, attach the nozzle securely, and charge the battery. Use one of the 4 modes for water pressure and place the irrigator tip at a 90-degree angle against teeth and gums, starting with the lowest setting. After use, rinse the unit with water, let it dry, and ensure the nozzle covers the sealing rubber ring to prevent water leakage.
Speed: To use the oral irrigator, first fill the 350ml water tank. Then, select one of the four cleaning modes (gentle, normal, DIY, or powerful) using the control buttons. Place the selected nozzle tip into the water tank and position the tip in your mouth. Turn on the device and use the tip to clean your teeth and gums. After use, remove the tip and clean it, then store the device properly. For detailed instructions on adjusting water pressure, cleaning the unit, and precautions, please refer to the user manual.
Speed: 1. Fill the water tank with lukewarm water. 2. Attach the desired tip securely. 3. Select the preferred pressure setting or cleaning mode. 4. Lean over the sink, place the tip in your mouth, and turn on the device.5. Guide the tip along the gumline and between teeth, allowing water to clean each area. 6. Empty any remaining water from the tank after use. 7. Rinse the tip thoroughly and store the device in a dry place. NOTE: First-time users should start at lowest pressure setting and gradually increase over time.
Speed: 1. Prepare the oral irrigator by attaching the tip and filling the water tank. 2. Adjust the water pressure to a comfortable setting. 3. Place the tip in your mouth and maneuver it around your teeth and gums to remove plaque and debris. 4. After use, clean the tip and water tank using the included cleaning brush and pry tools to remove any remaining residue. 5. Store the oral irrigator in a dry place to prevent bacterial growth.
Speed: For any issues, contact RUMFFLYE’s official after-sales support team—we will resolve all your inquiries.Usage Instructions:1. Fill the 300ml detachable water tank with lukewarm water. 2. Choose one of the 8 DIY modes or 4 professional settings using the one-touch mode switch. 3. Adjust water pressure from 20-120 PSI according to your preference and gum sensitivity. 4. Place the selected tip into the 360° rotating nozzle and turn on the device. 5. Close your mouth slightly and let water flow naturally into the sink to avoid splashes. 6. Maneuver the irrigator tip around your teeth, implants, and braces, ensuring it reaches deep between them. 7. After use, remove the tip and rinse both the tip and the unit with warm water. 8. Allow the unit to air dry completely before storing it. 9. Cha...