Speed: 1. Fill the 320ml water tank with warm water. 2. Choose your preferred mode (Normal, Pulse, DIY, Soft, or Stepless) and adjust water pressure from 60 to 200 psi. 3. Place the selected nozzle tip into the water flosser and position it at a 90-degree angle to your teeth. 4. Turn on the device and move the tip along your gum line and between teeth. 5. After use, remove the tip, rinse it under water, and store it in the provided case. 6. Clean the water tank and base after each use to prevent bacterial growth. 7. Charge the device for 3 hours before first use and every 42 days of use in soft mode.
Speed: 1. **Preparation**: Fill the 220ML water tank to the desired level. 2. **Power On**: Press the power button to turn on the device. 3. **Select Mode**: Choose from 3 cleaning modes (Soft, Normal, or Pulse) using the mode button. 4. **Use**: Place the tip in your mouth, close lips to form a seal, and tilt the irrigator to direct the water flow. 5. **Cleaning**: After use, remove the tip, rinse it, and store it in the provided case. Wipe the unit clean and store it properly. 6. **Precautions**: Do not use in water or near open flames. Keep away from children. Do not use if you have any medical conditions that could be affected by water pressure. Always follow the instructions provided with the product.
Name: With 5 cleaning modes, versatile nozzles, and a lightweight ergonomic design, WellLeo Water Flosser provides powerful water pressure (40-140Psi) to remove plaque, clear debris, and enhance oral health effectively and comfortably.
Speed: 1. Remove the tip from the handle. 2. Fill the water tank with warm water. 3. Reattach the tip to the handle. 4. Adjust the water pressure using the mode selector. 5. Lean over the sink and place the tip in your mouth. 6. Turn on the device and close your lips to form a tight seal. 7. Move the tip along your gum line, pausing briefly on each tooth. 8. After use, remove the tip and rinse both the tip and the handle. 9. Allow the unit to air dry. 10. Store the unit with the tip off and the tank empty.
Speed: 1. Prepare the oral irrigator by attaching the tip and filling the water tank. 2. Adjust the water pressure to a comfortable setting. 3. Place the tip in your mouth and maneuver it around your teeth and gums to remove plaque and debris. 4. After use, clean the tip and water tank using the included cleaning brush and pry tools to remove any remaining residue. 5. Store the oral irrigator in a dry place to prevent bacterial growth.
Speed: 1. Fill the water tank with lukewarm water. 2. Attach the desired tip securely. 3. Select the preferred pressure setting or cleaning mode. 4. Lean over the sink, place the tip in your mouth, and turn on the device.5. Guide the tip along the gumline and between teeth, allowing water to clean each area. 6. Empty any remaining water from the tank after use. 7. Rinse the tip thoroughly and store the device in a dry place. NOTE: First-time users should start at lowest pressure setting and gradually increase over time.
Speed: 1. Charge the device. 2. Fill the water tank. 3. Select a cleaning mode. 4. Lean over a sink. 5. Aim the flosser tip at the gumline. 6. Turn on the device.
Speed: To use the oral irrigator, first fill the 350ml water tank. Then, select one of the four cleaning modes (gentle, normal, DIY, or powerful) using the control buttons. Place the selected nozzle tip into the water tank and position the tip in your mouth. Turn on the device and use the tip to clean your teeth and gums. After use, remove the tip and clean it, then store the device properly. For detailed instructions on adjusting water pressure, cleaning the unit, and precautions, please refer to the user manual.