owc 1.0tb electra 6g ssd diy upgrade bundle for 2011, 2012 mac mini, includes data doubler, 5piece installation toolkit

Use the OWC Data doubler to install an Electra 6G SSD inside your 2011 or later Mac mini. This DIY kit includes all the tools necessary to complete the installation of the Data Doubler and the new drive, coupled with our free installation videos that offer step-by-step instructions, you can perform the entire upgrade on your own.The Mac mini is already an amazing feat of engineering, and you can pack even more power inside it with the OWC Data Doubler and an OWC Mercury Electra 6G SSD. With the 5-piece Toolkit from OWC, everything is included to complete the installation of the SSD. Once the upgrade is complete, you'll have a handy set of tools for future computer upgrades.The Toolkit includes the following:Phillips #00 screw driver, Torx T6 screw driver, Torx T8 screw driver, Straight Blade 1.8mm screw driver, Nylon Pry Tool (aka "Spudger"). Specifications: Controller: 4-Ch; NAND: 3D SLC NAND Flash, Cache: 3D SLC NAND, Storage: 3D TLC NAND; Form Factor: Standard 7mm 2.5"; Interface: SATA 6Gb/s, 3Gb/s & 1.5Gb/s supported, SATA 3.0 Compliant; Capacity: 1000GB useable capacity; SMART Attributes: Standard; Performance: Sequential Reads (Compressible Data): up to 532MB/s; Sequential Writes (Compressible Data): up to 467MB/s; Sequential Reads (Incompressible Data): up to 516MB/s; Sequential Writes (Incompressible Data): up to 408MB/s;
UPC NO:812437027723
SKU:ADIB076HBZ4CY