alphacool eisblock aurora gpx-a gpu water block with backplate, rx 6800/6800xt/6900 reference, nickel/plexi

The Alphacool Aurora Acrylic GPX-A 6800 (XT) Eisblock combines style with performance and extensive digital RGB lighting. The water block includes 1mm thick thermal pads for cooling on critical areas. The thickness of the copper plate is 5mm. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block.

No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. With the Aurora GPX-A 6800 (XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. The Eisblock Aurora GPX-A 6800 (XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal.

The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles.
Technical data: L x W x
B: 130 x 262, 5 x 24, 5
mmMaterial cooler: Nickle
plated copperMaterial top: AcrylThickness
cooling fins: 0, 6
mmThreads: 4x G1/4Power connector
Digital RGB: 3-Pin 5V (0, 5A)Compatibility
list: - AMD Radeon 6800/6800
XT/6900 XT Reference DesignModel: 11944