Speed: 1. Fill the 320ml water tank with warm water. 2. Choose your preferred mode (Normal, Pulse, DIY, Soft, or Stepless) and adjust water pressure from 60 to 200 psi. 3. Place the selected nozzle tip into the water flosser and position it at a 90-degree angle to your teeth. 4. Turn on the device and move the tip along your gum line and between teeth. 5. After use, remove the tip, rinse it under water, and store it in the provided case. 6. Clean the water tank and base after each use to prevent bacterial growth. 7. Charge the device for 3 hours before first use and every 42 days of use in soft mode.
Speed: Before use, click 'Mode' to select the mode, place it in your mouth, and press the 'ON/OFF' button to start or pause. Keep your mouth slightly closed during use. To clean, remove the nozzle and rinse the unit under water. Allow it to air dry with the charging port securely covered. For first-time use, select 'Child' mode.
Speed: 1. Fill the detachable 300ml water tank with water. Ensure the tank is securely attached to the device. 2. Select the desired cleaning mode (Low, Medium, High, or Pulse) using the control button. 3. Attach the appropriate tip to the irrigator head. 4. Turn on the device and aim the tip at the area you want to clean. 5. Move the tip slowly along the gum line and between teeth, ensuring all areas are reached. 6. After use, detach the water tank and rinse the irrigator head and tips under running water. 7. Dry the device completely before storing. 8. For optimal results, use the device daily and follow the manufacturer's recommendations for sensitive gums.
Speed: 1. Fill the 320 ml water tank with warm water. 2. Select the desired cleaning mode and water pressure. 3. Place the tip in your mouth and lean over the sink. 4. Turn on the device and close your lips to form a tight seal. 5. Direct the water stream at a 90-degree angle to your gumline, moving slowly and systematically around your mouth. 6. After use, remove the tip and rinse it under clean water. 7. Clean the water tank and any other removable parts with mild soap and warm water. 8. Allow all parts to air dry completely before storing. 9. Replace the tip every 3-6 months or as needed. 10. Charge the device for 3 hours after each use or when the battery indicator shows low power.