Speed: 1. Fill the water tank with lukewarm water. 2. Attach the desired tip securely. 3. Select the preferred pressure setting or cleaning mode. 4. Lean over the sink, place the tip in your mouth, and turn on the device.5. Guide the tip along the gumline and between teeth, allowing water to clean each area. 6. Empty any remaining water from the tank after use. 7. Rinse the tip thoroughly and store the device in a dry place. NOTE: First-time users should start at lowest pressure setting and gradually increase over time.
Speed: 1. Charge the device for 3 hours before first use. 2. Fill the 300ML water tank with warm water. 3. Select the appropriate tip and pressure setting. 4. Lean over the sink and place the tip in your mouth. 5. Turn on the device and maneuver the tip along your gumline and between teeth. 6. After use, remove the tip and rinse the device. 7. Allow the device to air dry with the tip off.
Speed: 1. Fill the water tank with warm water. 2. Choose the desired mode and adjust water pressure. 3. Lean over the sink and place the tip in your mouth. 4. Close lips around the tip and turn on the device. 5. Move the tip along your teeth and gums, pausing briefly on each tooth. 6. After use, clean the tip and water tank, and store the device properly.
Speed: 1. Fill the 320ml water tank with warm water. 2. Choose your preferred mode (Normal, Pulse, DIY, Soft, or Stepless) and adjust water pressure from 60 to 200 psi. 3. Place the selected nozzle tip into the water flosser and position it at a 90-degree angle to your teeth. 4. Turn on the device and move the tip along your gum line and between teeth. 5. After use, remove the tip, rinse it under water, and store it in the provided case. 6. Clean the water tank and base after each use to prevent bacterial growth. 7. Charge the device for 3 hours before first use and every 42 days of use in soft mode.