Speed: 1. Charge the device. 2. Fill the water tank. 3. Select a cleaning mode. 4. Lean over a sink. 5. Aim the flosser tip at the gumline. 6. Turn on the device.
Speed: 1. Fill the detachable water tank with lukewarm water. 2. Attach the desired nozzle to the irrigator tip. 3. Turn on the device and select the appropriate cleaning mode using the mode button. 4. Aim the nozzle at the area you want to clean and gently move it along the gum line and between teeth. 5. After use, rinse the nozzles and the tank with water and allow them to dry completely. 6. Store the device in the included travel pouch for easy transport. Precautions: Do not use while sleeping or with a medical condition that makes you prone to falling. Keep away from children. Do not submerge the charging port in water. Always unplug and allow the device to cool before charging.
Speed: 1. Fill the 320 ml water tank with warm water. 2. Select the desired cleaning mode and water pressure. 3. Place the tip in your mouth and lean over the sink. 4. Turn on the device and close your lips to form a tight seal. 5. Direct the water stream at a 90-degree angle to your gumline, moving slowly and systematically around your mouth. 6. After use, remove the tip and rinse it under clean water. 7. Clean the water tank and any other removable parts with mild soap and warm water. 8. Allow all parts to air dry completely before storing. 9. Replace the tip every 3-6 months or as needed. 10. Charge the device for 3 hours after each use or when the battery indicator shows low power.