Specification: Type: Analog Mixer with USB Interface
Computer Connectivity: USB (2 x 4)
A/D Resolution: 24-bit/192kHz
Faders: 22 x 60mm Faders
Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z), 15 x XLR (mic)
Phantom Power: Yes
Inputs - Line: 12 x 1/4", 6 x 1/4" (3 x stereo), 1 x 1/8" (stereo)
Outputs - Main: 2 x XLR, 2 x 1/4" (L/R), 2 x 1/4" (control room)
Outputs - Other: 4 x 1/4" (sub group out)
Aux Sends: 1 x FX Send (post), 2 x Monitor Send (pre), 1 x Monitor Send (pre/post)
Send/Return I/O: 1 x 1/4" (FX send), 3 x 1/4" (monitor send)
Busses/Groups: 2 x Sub Group
Inserts: 14 x 1/4" (channel)
Headphones: 1 x 1/4"
USB: 1 x Type B
Other I/O: 1 x 1/4" (footswitch)
Specification: ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D.
NOISE: 20 dB SPL
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
Dimension: 6.38" (Long) x 2.05" (maximum body diameter)