Specifications: Ethernet I/F: 10/100 Mbps
Protocol: SIP RFC 3261 Compatible
Power Input: PoE 802.3af compliantor +12 to +24 VDC at 1000 mA (500 mA minimum)
Payload Types: G711
Dimensions: 5" x 5" x 2.5"
Features: Faster V3 processor
Increased IP RATING to IP65
Now supports SRST (Survivable Remote Site Telephony)
New streamlined case design
*Optional Weather Shroud (pictured) for even greater
weather protection
PoE 802.3af enabled (Powered-over-Ethernet)
SIP compliant
Adaptive full-duplex voice operation
Network web management
Network adjustable speaker volume and microphone sensitivity
Network downloadable firmware
Doubles as a paging speaker
Dry relay contact for auxiliary control (controls external power)
Peer-to-peer capable
Door closur...
Features: The PTE110 is rich in features but priced for equipping the entire crew. It is the newest member of the P-touch family of industrial handheld labelling systems, which are designed to help give contractors the competitive "edge" so that they can become more productive by labelling the job quickly and efficiently. The PTE110 is designed to be simple to use - just pick it up, type and then print the label. Label application keys help you label cables by selecting the diameter of a cable or the width of a label that will fit precisely on a faceplate. By integrating smart layout features with intuitive navigation and easy to understand display messaging, the PTE110 can help you label just about anything that comes up. Using an innovative laminating thermal transfer printing engine with smart sensing technology, t...
Media sizes supported: Card thickness: 0.50 to 0.76 mm, automatic adjustment of the gauge
Card format: ISO CR-80 – ISO 7810 (53.98 x 85.60 mm)
Included in the solution: pack of 50 PVC cards 0.76 mm
Specifications: Protocol: SIP RFC 3261 Compatible
Ethernet I/F: 10/100 Mbps
Power Input: PoE 802.3af or 48VDC
Operating Temperature: -10 degrees C to 50 degrees C(14 degrees F to 122 degrees F)
Payload Types: G711
Regulatory Compliance: FCC Class A, UL 60950
Page Port Output Balanced 600 Ohm 10 VPP
Line In:
- Input Signal Amplitudes: 2.0 VPP maximum
- Input Impedance:10k ohm
Line Out:
- Output Signal Amplitudes:2.0 VPP maximum
- Output Level: +2dBm nominal
- Total Harmonic Distortion: 0.5% maximum
- Output Impedance: 10k ohm
Media sizes supported: Card thickness: 0.50 to 0.76 mm (20 to 30 mil), automatic gauge
Card format: ISO CR-80 – ISO 7810 (53.98 x 85.60 mm)
Total Media Capacity: Feeder capacity: 25 cards (0.76 mm – 30 mil) to 40 cards (0.50 mm – 20 mil)
Output hopper capacity: 25 cards (0.76 mm – 30 mil) to 40 cards (0.50 mm – 20 mil)