Your Browsing History
Any questions? Our AI mode will help you find out quickly.
Try me now
Quick View
2pcs Anodized Black Aluminum FIn Heatsink 28x28x20mm Electronic Cooler Radiator Heat sink for Northbridge Southbridge IC Chip
Limited time offer, ends 09/30
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
- Dimensions: 28 x 28 x 20mm
- Model #: 11-001-327
Quick View
10pcs/lot 15x15x0.3mm DIY Copper Shim Heatsink thermal Pad Cooling for Laptop BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
Limited time offer, ends 09/30
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.3mm
- Dimensions: 15mm x 15mm x 0.3mm
- Model #: 11-001-266
Quick View
10pcs 15x15x0.1/0.3/0.4/0.5/0.6/0.8/1.0/1.2mm Combo DIY Copper Heatsink thermal Pad,Laptop CPU VGA Chip RAM Memory chips Cooler
Limited time offer, ends 09/30
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
- Dimensions: 15x15mm
- Model #: CU-PAD-KIT
Quick View
10pcs/lot Silver Aluminum 25x15x11mm TO-220 TO220 heatsink radiator for MOS,7805 Triode Transistors Cooler IC Chip dissipation
Limited time offer, ends 09/30
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC. Quantity: a lot of 10 Pieces. M3 Screw Hole. Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H) Color : Silver Tone Weight: 4g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
- Dimensions: 25 x 15x 10mm
- Model #: 11-001-065
Quick View
20pcs/lot Silver Aluminum 19x15x10mm TO-220 TO220 heatsink radiator for MOS,L7805 LM337 Triode Transistors Cooler IC Chip
Limited time offer, ends 09/30
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Aluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset Quantity: a lot of 20 Pieces M3 Screw Hole. Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H) Thickness" 0.8mm Color : Anodized Black Weight: 2g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
- Dimensions: 19x 15x 10mm
- Model #: 11-001-067
Quick View
10pcs/lot Aluminum Heatsink 20*20*6mm Electronic Chip Radiator Cooler w/ 3M9448a Thermal Double Sided Adhesive Tape for IC,3D Printer,Motherboard,GPU,Xbox Cooling
Limited time offer, ends 09/30
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
- Dim...
- Model #: 11-001-060
Quick View
10pcs/lot 20x20x1.2mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM IC Memory chips Cooler Heat sink
Limited time offer, ends 09/30
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.2mm
- Dimensions: 20mm x 20mm x 1.2mm
- Model #: 11-001-273
Quick View
Thermal Grizzly Scraper - 3 Pack - Clear, Acrylic (TG-SC-3)
- Brand: Thermal Grizzly
- Model: TG-SC-3
- Part Number: TG-SC-3
- Color: Clear
- Model #: TG-SC-3
- $11.99 –
- More options from $11.99
- Free Shipping
Quick View
Copper Heatsink 7x7x5mm with 2.0 W/mK Thermal Adhesive Tape Heat Sink for Motherboard ,Memory, IC Chipset Cooling Radiator - Pack of 8
Limited time offer, ends 09/30
- Model #: 11-001-066
Quick View
Copper Heatsink 22x8x7mm with 2.0 W/mK Thermal Adhesive Tape Heat Sink for Motherboard ,Memory, IC Chipset Cooling Radiator - Pack of 8
Limited time offer, ends 09/30
- Model #: 11-001-236
Quick View
10pcs/lot 20x20x0.8mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
Limited time offer, ends 09/30
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
- Dimensions: 20mm x 20mm x 0.8mm
- Model #: 11-001-271
Quick View
120mm Water Cooling Radiator, 12 Tubes Copper Water Cooler for Computer CPU Heat Sink - Liquid Heat Exchanger Dual G1/4 Thread, 1.06 inch Thickness, Black
Limited time offer, ends 09/30
- Model #: 11-001-013
Quick View
20pcs/lot Aluminum Heatsink 11*11*5mm Electronic Chip Radiator Cooler w/ 3M9448a Thermal Double Sided Adhesive Tape for IC,3D Printer,Motherboard,GPU,Xbox Cooling
Limited time offer, ends 09/30
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
- Di...
- Model #: 11-001-049
Quick View
360mm Water Cooling Radiator, 12 Tubes Copper Water Cooler for Computer CPU Heat Sink - Liquid Heat Exchanger Dual G1/4 Thread, 1.06 inch Thickness, Black
Limited time offer, ends 09/30
- Model #: 11-001-015
Quick View
10pcs/lot 15x15x0.4mm DIY Copper Shim Heatsink thermal Pad Cooling for Laptop BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
Limited time offer, ends 09/30
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.4mm
- Dimensions: 15mm x 15mm x 0.4mm
- Model #: 11-001-267
Quick View
Black Net Jacket Sleeved 6 inch 1 to 2 Motherboard 4-pin Molex CPU Case 4 Pin PWM Cooling Fan Splitter Hub Power Adapter Cable
Limited time offer, ends 09/30
- Type: Fan splitter cable
- Length: 6 inches
- Connector Number: 3
- Model #: 121014
Quick View
- Type: Fittings
- Model #: BP-MBWP-C62
- $13.99 –
- More options from $6.80 - $13.99
- Free Shipping
Quick View
High Power 160x80x26.9mm Aluminum Extruded Heat Sink Radiator Heatsink for IC LED Electronic Chipset heat dissipation
Limited time offer, ends 09/30
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink; Material : Aluminium Color : Silver Tone Overall Size : 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H) Weight : 410g Package Content : 1 x Heatsink
- Dimensions: 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
- Model #: 11-001-331
Quick View
M.2 2280 Pure Copper Heatsink with Thermal Conductive Adhesive for Cooling M.2 NVMe / NGFF SSD Radiator, Suitable for Computer Laptop M2 Solid State Disk - 70x20x6.0mm
Limited time offer, ends 09/30
- Model #: 11-001-194
Quick View
50pcs/lot Aluminum Heatsink 8.8*8.8*5mm Electronic Chip Radiator Cooler w/ 3M9448a Thermal Double Sided Adhesive Tape for IC,3D Printer,Motherboard,GPU,Xbox Cooling
Limited time offer, ends 09/30
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
- Model #: 11-001-046
Quick View
5pcs/lot Aluminum Heatsink14x14x6mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
Limited time offer, ends 09/30
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
- Model #: 11-001-395
Quick View
- Type: Fittings
- Model #: BP-BSEML14-6P
Quick View
10pcs/lot Aluminum Heatsink 8.8x8.8x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
Limited time offer, ends 09/30
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
- Model #: 11-001-393
Quick View
240mm Water Cooling Radiator, 12 Tubes Copper Water Cooler for Computer CPU Heat Sink - Liquid Heat Exchanger Dual G1/4 Thread, 1.06 inch Thickness, Black
Limited time offer, ends 09/30
- Model #: 11-001-014
Quick View
- Type: Fittings
- Model #: BP-MBWP-C63
Quick View
10pcs/lot Aluminum Heatsink11x11x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
Limited time offer, ends 09/30
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
- Model #: 11-001-394
Quick View
- Type: Fittings
- Model #: BP-MBWP-C64
Quick View
- Type: Fittings
- Model #: BP-MBWP-C65