DIY Cooling

(1)

• Part Number: 90RC00V2-M0AAY0
• Type: Water Blocks
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700
• Block Dim.: 89 x 89 x 101mm
• Model #: ROG RYUJIN III WB WHT

(7)

• Type: CPU Block
• Block Compatibility: Intel LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 / 775 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Dim.: 93.4 L x 93.4 W x 52.2 H mm
• Block Material: Copper + PPS
• Model #: CL-W299-PL00SW-A

• Model #: CL-W345-PL00SW-A

• Model #: 9391048933537

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: CPU Block Socket Compatibility Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-ST_DWT

• Type: DIY Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-ST_DBK

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-D30_DBK

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-D30_DWT

• Type: CPU block
• Block Compatibility: Intel: LGA 1700 AMD: AM4 / AM5
• Specification: LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground) LED strip length: 65.9 mm Number of LEDs: 2x 5pcs Input Voltage: +5V Current (Single strip) Max: 0.15A Current (Dual Strip) Max: 0.3A Wattage (Single strip) Max: 0.75W Wattage (Dual Strip) Max: 1.5W Copper Base Dimension (WxDxH): 60.2 x 51 x 3.7mm (2.37 x 2 x 0.15in) Copper Thickness: 3.7 mm Fin Construction: 0.08 mm fin gap / 0.08mm thickness Materials: Acrylic / POM / Copper Aluminum Cover Fitting: Nickel Plated Brass Fitting Insert: ABS Supported Tube Size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic Tube Soft Tube: PVC Tube
• Package Contents: Glacier 450CPU Block 1x Push-in Fitting (Pre-installed) 2x Fitting ...
• Model #: PH-GEF_CPU450_DWT

• Type: CPU Block
• Model #: CC-PD-SR-G18

(1)

• Part Number: 90RC00V0-M0AAY0
• Type: Water Blocks
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700
• Block Dim.: 89 x 89 x 101mm
• Model #: ROG RYUJIN III WB

• Type: CPU Block
• Model #: RGV-LAN-O11EVOXL-LI-P-K

• Type: Hi-Res Display
• Color: Black
• Specification: Connection Type: HDMI, USB Power Display Size: 5.5" IPS Display Resolution: 2160x1440 Color Spectrum: sRGB99% Housing Color: Black Refresh Rate: 60hz
• Package Contents: Phanteks 5.5" Hi-Res Display 4x Fan Screws 4x M4 Screws 1x SATA to Micro USB Type B Cable 1x HDMI Cable 2x Feet
• Model #: PH-HRLCD_BK01

• Type: Hi-Res Display
• Color: White
• Specification: Connection Type: HDMI, USB Power Display Size: 5.5" IPS Display Resolution: 2160x1440 Color Spectrum: sRGB99% Housing Color: White Refresh Rate: 60hz
• Package Contents: Phanteks 5.5" Hi-Res Display 4x Fan Screws 4x M4 Screws 1x SATA to Micro USB Type B Cable 1x HDMI Cable 2x Feet
• Model #: PH-HRLCD_WT01

• Model #: BPM-ENCLP-EVO

• Type: CPU Block
• Model #: RGV-LAN-O11-EVO-P-K-NE

(48)

• Type: PETG Bending Kit (16mm)
• Block Compatibility: ID 12mm x OD 5/8" (16mm) hard tube
• Specification: Bender kit designed for ID 1/2" (12mm) x OD 5/8" (16mm) hard tube, including mandrels, cord, reamer, and cutter.
• Package Contents: 1 x 45° & 90° Mandrel 1 x 180° Mandrel 1 x 360° Mandrel 1 x PETG Tube Cutter 1 x 12mm Silicone Tube Insert 1 x Inside/Outside Tube Reamer
• Model #: CL-W093-AL00BL-A

• Type: CPU Block
• Model #: 6932167219640

• Model #: BPTA-WDPO11DEVO-REV

(25)

• Type: Reservoir + Pump
• Specification: Dimension: 79 (L) x 79 (W) x 196.7 (H) Material: AL + POM + PMMA Capacity: 250ml Maximum Flow Rate: 1135 L/hr Maximum Pressure: 50 PSI Input Voltage : 12V / 5V Connector: 4-pin Peripheral Port Thread: G 1/4" Pump Speeds: 1800 RPM/2550 RPM/3300 RPM/4050 RPM/4800 RPM
• Model #: CL-W338-PL00SW-A

• Model #: 1-Water-Cooling1428

Limited time offer, ends 10/30

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Type: VGA Block & Cooler
• Specification: Enclosed: - EK-Quantum Vector RTX RE Ti D-RGB series high-performance water block - Mounting mechanism with screw-in brass standoffs - Necessary mounting screws, nuts, and washers - 2x Nickel plated brass plug G1/4" - 6mm Allen key - Thermal pads - Thermal grease EK-TIM Ectotherm (1g) Material / Design / Color option: Nickel Plexi Threads: G1/4 Chip Manufacturer: Nvidia GeForce
• Model #: 3831109814352

• Model #: 1-Com-Cooler3003

Limited time offer, ends 10/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Type: CPU Block
• Model #: RGV-LAN-O11XL-P-K

• Type: VGA Block & Cooler
• Model #: 3831109814345

• Type: VGA Block & Cooler
• Model #: 3831109814376

• Model #: 1-Water-Cooling0892

(1)

• Part Number: 90RC00V2-M0AAY0
• Type: Water Blocks
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700
• Block Dim.: 89 x 89 x 101mm
• Model #: ROG RYUJIN III WB WHT

(7)

• Type: CPU Block
• Block Compatibility: Intel LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 / 775 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Dim.: 93.4 L x 93.4 W x 52.2 H mm
• Block Material: Copper + PPS
• Model #: CL-W299-PL00SW-A

• Model #: CL-W345-PL00SW-A

• Model #: 9391048933537

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: CPU Block Socket Compatibility Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-ST_DWT

• Type: DIY Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-ST_DBK

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-D30_DBK