DIY Cooling

Limited time offer, ends 07/30

• Model #: 11-001-254(10)

• Type: Liquid Cooling System
• Features: Compatibility : ASUS TUF Gaming GT502 Case Hercules Pump Specification: Rated Voltage: 12V DC Operation Voltage: 8 ~ 20V Rated Current: 1.2 ± 10% A Power consumption: 15W Maximum flow: 11 ± 15% LPM Maximum pump lift: 5.5 ± 0.5m System Temperature: -25 ~ 80 °C Noise Level: 40dBA MTBF: 15,000 hours PWM: Yes
• Package Contents: Included : 1set of BPTA-WDPGT502 1set of Drain Hose Set 1set of Mounting Screws/Accessories
• Model #: BPTA-WDPGT502

Limited time offer, ends 07/30

• Model #: 11-001-349

Limited time offer, ends 07/30

• Model #: 11-001-360

Limited time offer, ends 07/30

• Model #: 11-001-373

• Model #: BPTA-WDPTORQUE-R-P5D

Limited time offer, ends 07/30

• Model #: 11-001-354

• Model #: SU1225FD12H-RP

Limited time offer, ends 07/30

• Model #: 11-001-357

Limited time offer, ends 07/30

• Model #: 11-001-361

• Model #: BPTA-WDPGR701

• Model #: 649823631604

• Type: CPU Block
• Model #: B-PCI-EM-X-V2

• Type: CPU Block
• Fan Size: No Fans
• Color: N/A
• Model #: GY-M

• Type: CPU Block
• Model #: RGV-LAN-O11-EVO-P-K-NE

• Type: CPU Block
• Model #: RGV-COS-900D-P-K

• Model #: ACFAN00200A

Limited time offer, ends 07/30

• Model #: 11-001-362-12CM

• Model #: 1022799

• Type: CPU Block
• Model #: RGV-COS-570X-P-KG

(8)

• Model #: ARGB&PWM HUB

Limited time offer, ends 07/30

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Type: CPU Block
• Model #: RGV-LAN-O11EVOXL-P

Limited time offer, ends 07/30

• Model #: 11-001-362-9CM

• Type: Fittings
• Model #: 29886

Limited time offer, ends 07/30

• Model #: 11-001-362-6CM

Limited time offer, ends 07/30

• Model #: 11-001-362-14CM

• Model #: 649823635541

• Type: CPU Block
• Model #: 6932167221742

• Model #: BPTA-WDPBLAZER-R-PWM

• Type: CPU Block
• Model #: 6932167221032

• Type: CPU Block
• Block Compatibility: False
• Pump Bearing: 0.2
• Pump Capacity: WACZ Alphacool Eisbaer Schraubenkit M3 x 5/M3 x 30mm
• Model #: 15314

• Type: CPU Block
• Model #: RGV-COS-7000D-P-KG

• Part Number: RL-AEROSLOT2-W
• Type: Accessories
• Specification: Material: Steel
• Model #: RL-AEROSLOT2-W

Limited time offer, ends 07/30

• Model #: 11-001-265

(25)

• Type: Reservoir + Pump
• Reservoir Dim.: 74.8 (L) x 74.8 (W) x 267 (H) mm
• Reservoir Capacity: 400ml
• Specification: Material: AL + POM + PMMA Capacity: 400ml Maximum Flow Rate: 1135 L/hr Maximum Pressure: 50 PSI Input Voltage: 12V / 15V Connector: 4-pin Peripheral Port Thread: G 1/4" Pump Speeds: 1800 RPM/2550 RPM/3300 RPM/4050 RPM/4800 RPM
• Model #: CL-W280-PL00SW-A