DIY Cooling

(58)

• Type: Display Upgrade Kit
• Color: Black
• Package Contents: ELITE LCD Cap Assembly 4x ELITE Capellix mounting screws RGB Module Removal Tool USB Y-Splitter
• Model #: CW-9060056-WW

Limited time offer, ends 01/31

• Brand: EN-Labs
• Model #: 36WPCICON5D

• Type: CPU Block
• Model #: RTP58-BKIT

Limited time offer, ends 01/31

• Type: Fan power cable
• Type: PWM 4pin fan hub splitter
• Color: Black
• Length: 16inches / 40CM
• Model #: PWMHUB10S

• Type: CPU Block
• Model #: RTP58-CKIT

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

• Type: CPU Block
• Fan Size: 1 Fan Slot (120 mm)
• Fan RPM: 1800 RPM (PWM) +/- 10%
• Fan Air Flow: 80CFM(Max)
• Model #: BPA-PHSL-4H1T-DRGB

• Type: CPU Block
• Model #: B-FRB240

• Type: CPU Block
• Model #: B-FRB360

• Model #: HT-ComCoolin000796

• Model #: HT-ComCoolin000363

Limited time offer, ends 01/29

• Model #: 1-Com-Cooler0997

• Model #: 1-CaseFans0493

Limited time offer, ends 01/12

• Model #: B09LGY38L4-YX006

• Type: CPU Block
• Model #: RT14M-TOOL

• Type: CPU Block
• Color: Frosted
• Model #: RT14MA-430-F

• Type: CPU Block
• Model #: CPU-XPR-C-M-NE

• Type: CPU Block
• Model #: 6932167222572

• Model #: 1-Com-Cooler1175

• Type: CPU Block
• Model #: CP-DWPB-X

Limited time offer, ends 01/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Model #: HT-ID464-1421702

Limited time offer, ends 01/19

• Model #: 1-Com-Cooler1341

• Model #: 1-Water-Cooling1028

• Type: CPU Block
• Model #: A-RX7900XT-X

• Type: CPU Block
• Model #: N-AS5070PM-X

• Type: CPU Block
• Model #: CPU-XPR-POM-M-V2-NE

off w/ promo code PHAKF57, limited offer

• Type: CPU block
• Block Compatibility: Intel: LGA 1700 AMD: AM4 / AM5
• Specification: LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground) LED strip length: 65.9 mm Number of LEDs: 2x 5pcs Input Voltage: +5V Current (Single strip) Max: 0.15A Current (Dual Strip) Max: 0.3A Wattage (Single strip) Max: 0.75W Wattage (Dual Strip) Max: 1.5W Copper Base Dimension (WxDxH): 60.2 x 51 x 3.7mm (2.37 x 2 x 0.15in) Copper Thickness: 3.7 mm Fin Construction: 0.08 mm fin gap / 0.08mm thickness Materials: Acrylic / POM / Copper Aluminum Cover Fitting: Nickel Plated Brass Fitting Insert: ABS Supported Tube Size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic Tube Soft Tube: PVC Tube
• Package Contents: Glacier 450CPU Block 1x Push-in Fitting (Pre-installed) 2x Fitting ...
• Model #: PH-GEF_CPU450_DWT

• Type: CPU Block
• Model #: PC-T8O-CP

• Type: CPU Block
• Model #: F-RSX12-CRD-6

• Type: CPU Block
• Model #: CPU-XPR-M-V3

• CPU Type: AMD Ryzen 9 9000 Series
• Form Factor: Tower
• CPU Name: AMD Ryzen 9 9900X3D
• GPU/VGA Type: NVIDIA RTX PRO 2000 Blackwell
• Model #: B7512

• Type: CPU Block
• Model #: PFLEXA10-34

• Type: CPU Block
• Model #: RT16MA-430-F

• Type: CPU Block
• Model #: FA45-SW

• Type: CPU Block
• Model #: CP-D5PB-X

Limited time offer, ends 01/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
• Dimensions: 20mm x 20mm x 0.8mm
• Model #: 11-001-271

off w/ promo code PHAKF56, limited offer

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_CPU450_DBK