DIY Cooling

• Model #: 1-Com-Cooler0622

• Model #: 1-Com-Cooler0430

• Model #: 1-Com-Cooler0743

• Model #: 1-Com-Cooler0456

• Model #: 1-Com-Cooler2307

• Model #: 1-Com-Cooler2724

• Model #: HT-ComCoolin000796

• Model #: 1-Water-Cooling1245

• Model #: 1-Com-Cooler1671

• Model #: 1-Water-Cooling0299

• Model #: 1-Water-Cooling0147

• Model #: 1-Com-Cooler2618

• Model #: 1-Water-Cooling0627

• Model #: 1-CaseFans1282

• Model #: 1-Water-Cooling1226

Limited time offer, ends 01/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

Limited time offer, ends 01/31

• Model #: 11-001-016

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

• Type: CPU Block
• Model #: PC-OP32K-UGSX

• Model #: 1-CaseFans0598

• Model #: 1-Com-Cooler1280

• Model #: 1-CaseFans0162

• Model #: 1-Com-Cooler0661

• Model #: 1-Com-Cooler0382

Limited time offer, ends 01/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20mm x 14mm x 6mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H) Weight: 25g Package Content: 10pcs x Heatsink
• Dimensions: 20 x 14x 6mm
• Model #: 11-001-321

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset,graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20mm x 20mm x 6mm low profile Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 20x 20x 6mm/ 0.8" x 0.8" x 0.23" (L*W*H) Weight: 25g Package Content: 10pcs x Heatsink
• Dimensions: 20x 20x 6mm
• Model #: 11-001-324

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset,graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 19mm x 19mm x 5mm low profile Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 19mm x 19mm x 5mm Weight: 25g Package Content: 10pcs x Heatsink
• Dimensions: 19mm x 19mm x 5mm
• Model #: 11-001-323

• Type: CPU Block
• Model #: PC-ICE2-UP