DIY Cooling

• Model #: 1-Com-Cooler1645

• Model #: 1-Com-Cooler1440

Limited time offer, ends 04/19

• Part Number: AD-M2CL2PC
• Type: cooler
• Features: Features : Copper Heatsinks Cooling Fin for M.2 2280 SSD Main Body Material: 100% copper, cut andpolished,High performance Thermal Heatsink; Suitable for NVME M.2 SSD Laptop, AHCI M.2SSD and Sata-based M.2 SSD Compatible PCIe NVMe M.2 SSD brand andmodels (List only part of them): - 850EVO / 860EVO / 960EVO /950PRO / 960PRO / SM951
• Package Contents: 2 x M.2 SSD HeatSink(Copper) 2 x m.2 thermal pads(0.5mm/1mm) 4 x Rubber Rings
• Model #: AD-M2CL2PC

Limited time offer, ends 04/19

• Brand: Adiven
• Type: cooler
• Features: Designed for M.2 SSD: The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. 10-30°C Cooling Effect: Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. Comes with Thermal Pad, Rubber Rings and bandages: thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear...
• Model #: AD-M2CL722

• Model #: 1-Com-Cooler1209

Limited time offer, ends 04/30

• Model #: 11-001-325

Limited time offer, ends 04/30

• Model #: 11-001-255(2)

• Model #: 1-Com-Cooler0919

• Model #: 1-Com-Cooler1133

Limited time offer, ends 04/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

Limited time offer, ends 04/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.3mm
• Dimensions: 15mm x 15mm x 0.3mm
• Model #: 11-001-266

• Model #: 1-Com-Cooler0380

• Model #: 1-Com-Cooler0356

Limited time offer, ends 04/30

• Model #: 11-001-066

• Model #: 1-CaseFans0384

• Model #: 1-Com-Cooler1421

• Model #: 1-Com-Cooler0565

Limited time offer, ends 04/30

• Model #: 11-001-236

• Model #: 73-CaseFans0920

Limited time offer, ends 04/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Model #: 1-CaseFans0920

• Block Compatibility: False
• Pump Bearing: 4
• Pump Capacity: WAR Alphacool GPU RAM Copper Heatsinks 10x10mm - 10 Stk.
• Pump Noise: Passivkühler
• Model #: 17426

• Model #: 1-Com-Cooler1734

• Model #: 1-Com-Cooler1295

• Model #: 27-Com-Cooler1295

• Model #: 1-Com-Cooler0772

• Model #: 1-Water-Cooling0653

Limited time offer, ends 04/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
• Dimensions: 15x15mm
• Model #: CU-PAD-KIT

• Model #: 27-Com-Cooler1440

Limited time offer, ends 04/19

• Model #: 27-Com-Cooler1868

• Model #: 1-Com-Cooler1587

• Model #: 1-Com-Cooler1348

• Model #: 1-Com-Cooler2003

Limited time offer, ends 04/30

• Model #: 11-001-330

• Model #: 1-Com-Cooler1909

• Model #: HT-ComCoolin000149

• Model #: 649823631963

Limited time offer, ends 04/30

• Model #: 11-001-062