Specifications: Interfaces/Ports
PoE (RJ-45) Port:
No
USB:
No
Management Port:
No
Number of Network (RJ-45) Ports:
1
Number of FXS (RJ-11) Ports:
2
I/O Expansions
SIM Card Supported:
No
Network & Communication
Ethernet Technology:
Fast Ethernet
Network Standard:
10/100Base-T
Wireless Specifications
Wireless LAN:
No
Power Description
Redundant Power Supply Supported:
No
Physical Characteristics
Form Factor:
Wall Mountable
Desktop
Height:
3.9"
Width:
3.9"
Depth:
1"
Weight (Approximate):
4.70 oz
Security: User and administrator level access control, MD5 and MD5-sess based authentication, 256-bit AES encrypted configuration file, TLS, SRTP, HTTPS, 802.1x media access control
Additional Features: Technical Information
Features:
Directory
Speed Dial
Programmable
Display & Graphics
Screen Size:
3.5"
Screen Type:
TFT LCD
Screen Resolution:
480 x 272
Backlight:
Yes
Controls/ Indicators
Buttons & Keys:
Illuminated Buttons:
Off (dark): Line available
Green, steady: Line in use
Red, steady: Line in use by shared line
Amber, flashing: Line ringing
Illuminated Page Buttons
Off (dark): Page not in focus
Green, steady: Page in focus
Amber, flashing: Page not in focus, with one or more alerting or on-hold calls present on page
Power Description
Power Source:
AC Adapter
Input Voltage:
48 V DC
Physical Characteristics
Height:
9"
Width:
4.5"
Depth:
1.6"
Weight (Approximate):
15.80 oz
Miscellaneous
Compatibility:
Cisco 8800 IP Phones:
8851
8851NR
8861...
Specifications: Interfaces:
Telephone Interfaces Two (2) FXS ports
Network Interfaces One (1) 10/100 Mbps auto-sensing ethernet ports (RJ45)
LED Indicators POWER, INTERNET, PHONE1, PHONE2
Factory Reset Button Yes
Voice, Fax, Modem:
Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference
Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD / CNG), G.723.1, G.729A/B, G.726, iLBC,
OPUS, dynamic jitter buffer, advanced line echo cancellation
Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax
Pass-through
Short / Long Haul Ring Load 2 REN: Up to 1 km on 24 AWG
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Disconnect Methods Busy Tone, Polarity Reversal / Wink, Loop Current
Signaling:
Network Protocols...