Specifications: Display:
4.3" 272 x 480-pixel color display with backlight
16 bit depth color
Three page views are possible
Different color icons for each function shown on the LCD
Features Keys and Indicator:
20 physical keys each with a dual-color LED
40 additional keys through page switch
3 independent control keys with illuminated LED are used for fast switching pages
Programmable for shared line, BLF List, call park,conference, forward, group pickup, group listening, LDAP, XML Browser
Features:
Wallpaper
Screensaver
Power saving
Avatar Display on SFB and UC platform (pending)
Stand with 2 adjustable angles
For support of two or three Expansion Modules, an external Yealink power adapter (5V / 2A) is required.
Up to three EXP50 can be attached on any Yealink
T5 Series IP phones:
USB port (2.0 compliant) for data in and out
USB port (2.0 compliant) for: wired / wirele...
Protocols: DHCP VLAN discovery; LLDP-MED for VLAN discovery; FTP/TFTP/HTTP/HTTPS server-based central provisioning; Hardware diagnostics; Manual or dynamic host con?guration protocol (DHCP) network setup; Network address translation support for static configuration and Keep-Alive; QoS Support — IEEE 802.1p/Q tagging (VLAN), Layer 3 TOS, and DHCP; Status and statistics reporting; Syslog Event Logging; Conforms to IEEE802.3-2005 (Clause 40) for physical media attachment; Conforms to IEEE802.3-2002 (Clause 28) for link partner auto-negotiation; Time and date synchronization using SNTP; RTCP and RTP support; IPv4; IPv6; Provisioning and call server redundancy support; DNS-SRV; UDP; SIP protocol support; IETF SIP (RFC 3261 and companion RFCs)
Specifications: Interfaces:
Telephone Interfaces Two (2) FXS ports
Network Interfaces One (1) 10/100 Mbps auto-sensing ethernet ports (RJ45)
LED Indicators POWER, INTERNET, PHONE1, PHONE2
Factory Reset Button Yes
Voice, Fax, Modem:
Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference
Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD / CNG), G.723.1, G.729A/B, G.726, iLBC,
OPUS, dynamic jitter buffer, advanced line echo cancellation
Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax
Pass-through
Short / Long Haul Ring Load 2 REN: Up to 1 km on 24 AWG
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Disconnect Methods Busy Tone, Polarity Reversal / Wink, Loop Current
Signaling:
Network Protocols...
Protocols: DHCP VLAN discovery; LLDP-MED for VLAN discovery; FTP/TFTP/HTTP/HTTPS server-based central provisioning; Hardware diagnostics; Manual or dynamic host configuration protocol (DHCP) network setup; Network address translation support for static configuration and Keep-Alive; QoS Support — IEEE 802.1p/Q tagging (VLAN), Layer 3 TOS, and DHCP; Status and statistics reporting; Syslog Event Logging; Conforms to IEEE802.3-2005 (Clause 40) for physical media attachment; Conforms to IEEE802.3-2002 (Clause 28) for link partner auto negotiation; Time and date synchronization using SNTP; RTCP and RTP support; IPv4; IPv6; Provisioning and call server redundancy support; DNS-SRV; UDP; SIP protocol support; IETF SIP (RFC 3261 and companion RFCs)
Security: IPv4/IPv6
IP Assignment: Static/DHCP
Proxy mode
HTTP/HTTPS web server
Time and date synchronization using SNTP
Transport Layer Security (TLS)
HTTPS certificate manager
IEEE802.1X
AES encryption for configuration file
Protocols: Network protocols, supported
10/100/1000 Base-TX across LAN and PC ports; Conforms to IEEE802.3- 2005 (Clause 40) for physical media attachment; Conforms to IEEE802.3- 2002 (Clause 28) for link partner auto-negotiation; Manual or dynamic host configuration protocol (DHCP) network setup
Specifications: Interfaces
Telephone Interfaces Two (2) FXS ports
Network Interfaces One (1) 10/100Mbps auto-sensing ethernet ports (RJ45)
LED Indicators POWER, INTERNET, PHONE1, PHONE2
Factory Reset Button Yes
Voice, Fax, Modem
Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference
Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, iLBC,
dynamic jitter buffer, advanced line echo cancellation
Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax
Pass-through
Short/Long Haul Ring Load 2 REN: Up to 1km on 24 AWG
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Disconnect Methods Busy Tone, Polarity Reversal/Wink, Loop Current
Signaling
Netwo...