Specifications: Interfaces:
PoE IN:1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE "Data + DC power" in auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE OUT: 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE "Data + DC power" out auto MDI/MDI-X, auto-negotiation RJ45 connector
Power over Ethernet
PoE Standard:
"PoE In" Port: IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per "PoE Out" Port:
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE Power Supply Type: End-span (Type A)
PoE Power:
"PoE In" Port: 52 - 56V DC, max. 30.8 watts
Per "PoE Out" Port: 44 - 55V DC, max. 25 watts
Power Pin Assignment:
"PoE In" Port: 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per "PoE Out" Port: 1/2 (+), 3/6 (-)
Data Rate: 10/100/1000Mbps
MAC Address Table: 2K
Data Bu...
Specifications: Supports Yealink SIP-T48G/T46G/T42G/T41P/T40P/T29G/ T27P
Compatible with Jabra,Plantronics,Sennheiser wireless headsets
Built-in a RJ12(6P6C) input port connected to IP phone
1 x RJ45(8P8C) output port for GN/Jabra headset
1 x 3.5mm output port for Plantronics headset
Features: Full compatible with Jabra & Plantronics
Control phone through wireless headset
Plug and play, Easy to use
Answer incoming call through remote wireless headset
Terminate calls using remote wireless headset key
Incoming calls are signalled in the headset earpiece
Features: The switch provides uncontested "wire speed" bandwidth at every port - a total of 320 Gbps per switch with less than 4 ms fabric latency.
The switch supports FC-SW-2 interoperability standards and transparent mode of operations to simplify integration into a multi-vendor fabric.
The switch provides low total cost of ownership (TCO)