Features: Anti-interference Network Cable Tester: Adopt advanced digital/analog/POE mode, high sensitivity, less noise interference, easy to accurately locate the target cable, widely used in engineering wiring, network and equipment maintenance
Optical power Meter Test & Port Flashing: Connect the network cable to be tested to the transmitter, the wire tracker will automatically detect the optical fiber frequency and the port indicator will flash on the same screen, which can display the working speed of the port, which is convenient for accurately locating the line and port.
Multifunctional Network Cable Tester: There are nine features to meet your needs. Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing, optical power meter, VFL function, and NVC function.
PoE Testing: PoE testing can check cable mapping polarity and volta...
Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (High Power over Ethernet)
PoE Power Supply Type: Mid-Span / Type B
PoE Power Output: 52V DC, 510 mA, Max. 26 watts
Power Pin Assignment: 4/5 (+), 7/8 (-)
Maximum Distance: 4 units, daisy-chain installation with 500m support
Data Rate: 10/100/1000 Mbps
Switch Architecture: Store-and-Forward
Maximum Frame Size: 1552 Bytes
Flow Control:
Back pressure for half-duplex
IEEE 802.3x pause frame for full-duplex
LED Indicators:
1 x PoE IN (Green)
1 x LAN Data (Green)
1 x PoE OUT (Green)
Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC
Power Consumption: 3.2 watts (system maximum)