Specifications: Hardware Version: 2
Interface:
"Data" Out Port:1 x RJ-45 STP
"PoE (Power + Data)" Input Port:1 x RJ-45 STP
DC Out Plug Connector:1
LED Indicator: System: 1 x PoE in Use (Green)
Network Cable: UTP Cat. 5/5e/6, up to 100m (328 ft.)
Data Rate: 10/100/1000 Mbps
PoE Standard: IEEE 802.3at Gigabit Power over Ethernet / PD
PoE Power Input: IEEE 802.3at 52~56V DC
DIP Switch: 5V DC / 12V DC output voltage
Number of devices that can be powered: 1
Standards Compliance IEEE 802.3 10BASE-T Ethernet:
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Standards: IEEE 802.11ac (up to 433 Mbps)
IEEE 802.11n (up to 300 Mbps)
IEEE 802.11a (up to 54 Mbps)
IEEE 802.11g (up to 54 Mbps)
IEEE 802.11b (up to 11 Mbps)
Frequency Band: 2.4 GHz / 5.0 GHz
Wireless Data Rates: Up to 750Mbps
Security: 64 / 128-bit WEP, WPA-PSK and WPA2-PSK encryption
802.1x authentication, User access control (in access point mode)
WPS (Wi-Fi Protected Setup)
Specifications: Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet
Auto MDI/MDI-X
UTP port auto-senses network speed
Switch selectable half or full duplex operation on the fiber port
Fiber lengths up to 2Km
2 Power Choices - AC-DC Adapter or USB
5 LED Function lights
Uses 62.5/125 or 50/125 Multimode cable
Wavelength: 1310nm
Supports Link Fault Pass-through (LFP) for easy tracing of network link failures
Interfaces/Ports:
1 x RJ-45
1 x SC Duplex
Connectivity:
UTP
Fiber
Connectivity Media:
10/100Base-TX Category 5 UTP
10/100Base-TX Category 6 UTP
100Base-FX 50/125 µm Multi-mode Fiber
100Base-FX 62.5/125 µm Multi-mode Fiber
Package Contents:
N784-001-SC UTP to Fiber Media Converter
10/100 Media Converter, UTP - SC
AC-DC Power Adapter ( 100-240V )
Owner's Manual
Specifications: Interface:
Wi-Fi
Micro USB (Support USB 2.0)
Color: White
Capacities: 32GB
Network Standard: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Operating Frequency: 2.4 GHz / 5 GHz
Ports:
1 x SD Card Reader
1 x Micro USB
Button: Reset Button, Power Button, Channel Switch
LED Indicator:
1 x Power
1 x Wi-Fi
System Requirements:
Windows 10 86x64
Windows 8 86x64
Windows 7 86x64
Mac OS X 10.6 or higher
iOS7 or higher
AndroidTM 4.0 or higher
Kindle Fire HD and HDX
Specifications: xDirect485 Single Port RS232/422/485 10/100 Device Server
Serial Connectors: Single-port: DB9F (RS232/RS422/RS485, DCE Pinned)
Ethernet Interface: 10/100M RJ-45
Serial Interface Baud Rate: 300bps to 921.6 Kbps
LED Indicators: Power/Status, Link, Activity, Serial RX Activity & TX Activity
CPU: Based on DSTni-EX Enhanced 16-bit x86 Architecture
Memory: 256 KB SRAM, 1 MB Flash
100-240 VAC International Power Supply with Regional Adapters
Specifications: Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet
Auto MDI/MDI-X
UTP port auto-senses network speed
Switch selectable half or full duplex operation on the fiber port
Fiber lengths up to 2Km
2 Power Choices - AC-DC Adapter or USB
5 LED Function lights
Uses 62.5/125 or 50/125 Multimode cable
Wavelength: 1310nm
Supports Link Fault Pass-through (LFP) for easy tracing of network link failures
Interfaces/Ports:
1 x RJ-45
1 x ST Duplex
Connectivity:
UTP
Fiber
Connectivity Media:
10/100Base-TX Category 5 UTP
10/100Base-TX Category 6 UTP
100Base-FX 50/125 µm Multi-mode Fiber
100Base-FX 62.5/125 µm Multi-mode Fiber
Package Contents:
N784-001-ST UTP to Fiber Media Converter
10/100 Media Converter, UTP - ST
AC-DC Power Adapter ( 100-240V )
Owner's Manual
Specifications: xDirect232 Single Port RS232 10/100 Device Server
Serial Connectors: Single-port: DB9F RS232 (DCE Pinned)
Ethernet Interface: 10/100M RJ-45
Serial Interface Baud Rate: 300bps to 921.6 Kbps
LED Indicators: Power/Status, Link, Activity, Serial RX Activity & TX Activity
CPU: Based on DSTni-EX Enhanced 16-bit x86 Architecture
Memory: 256 KB SRAM, 1 MB Flash
100-240 VAC International Power Supply with Regional Adapters.
Specifications: xDirect PoE Single Port RS232/422/485 10/100 Device Server w/o Power Supply
Serial Connectors: Single-port: DB9F (RS232/RS422/RS485, DCE Pinned)
Ethernet Interface: 10/100M RJ-45
Serial Interface Baud Rate: 300bps to 921.6 Kbps
LED Indicators: Power/Status, Link, Activity, Serial RX Activity & TX Activity
CPU: Based on DSTni-EX Enhanced 16-bit x86 Architecture
Memory: 256 KB SRAM, 1 MB Flash
*No Power Supply