Specifications: Application/Usage: Data Networking
Expansion Slots: 2 x Expansion Slot
The Multi-Switch Interconnect Module (MSIM) for IBM BladeCenter is a switch module container that converts a stacked pair of high-speed I/O bays into two standard I/O bays.
Specifications: Protocol: SIP RFC 3261 Compatible
Ethernet I/F: 10/100 Mbps
Power Input: PoE 802.3af or 48VDC
Operating Temperature: -10 degrees C to 50 degrees C(14 degrees F to 122 degrees F)
Payload Types: G711
Regulatory Compliance: FCC Class A, UL 60950
Page Port Output Balanced 600 Ohm 10 VPP
Line In:
- Input Signal Amplitudes: 2.0 VPP maximum
- Input Impedance:10k ohm
Line Out:
- Output Signal Amplitudes:2.0 VPP maximum
- Output Level: +2dBm nominal
- Total Harmonic Distortion: 0.5% maximum
- Output Impedance: 10k ohm
Specifications: Hardware Version: 2
Interface:
"Data" Input Ports: 4 x RJ-45
"Data+Power" Output Ports: 4 x RJ-45
Data Rate: 10/100/1000 Mbps
LED:
System: Power x 1 (Green)
Per PoE Port: PoE ready / in-use x 4 (Green)
Network Cable:
10Base-T: 4-Pair UTP Cat. 5 up to 100m (328 ft.)
100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328 ft.)
1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328 ft.)
EIA/TIA- 568 100-ohm STP (100m, 328 ft.)
Power Requirements: DC 52V~56V
PoE Power Supply Type: Mid-Span
PoE Power Output: Per Port DC 52V 30.8 watts / 15.4 watts
Power Pin Assignment: 4/5(+), 7/8(-)
PoE Power Budget: 120 watts
Number of 802.3af PD Class 0, 1, 2, 3 can be powered: 4
Number of 802.3at PD Class 1, 2, 3 can be powered: 4
Number of 802.3at PD Class 0, 4 can be powered: 4
Standards Compliance:
IEEE 802.3 10Bas...