Features: Max. Power Consumption: 20W (Excludes PoE Output)
Power Method:
External AC / DC Power Adapter, 24W
(24V, 1A) (Included)
24V Passive PoE
Power Supply: External AC / DC Adapter
Button: Reset
Networking Interfaces:
1 x RJ45 Serial Port
10 x Ethernet Ports (Default Port 0)
10 x 10/100/1000 RJ45 Ports
2 x 1 Gbps SFP Ports
Processor: 4-Core 1 GHz, MIPS64
System Memory: 1GB DDR3 RAM
On-Board Flash Storage: 4GB eMMC, 8MB SPI NOR
Interface: 1 x PoE+ Gigabit LAN port (power input)
1 x Gigabit LAN port
Power port (optional non-PoE installation)
LED indicators
Mounting plate and cable guard
On/Off power button
Reset button
Standards: IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3at
IEEE 802.1Q
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n (up to 400 Mbps @ 256 QAM)
IEEE 802.11ac Wave 2 (5 GHz 1: up to 867 Mbps, 5 GHz 2: up to 867 Mbps @ 256 QAM)
Frequency Band: Dual radio for simultaneous dual-band operation
5 GHz 802.11ax 4x4 MIMO for up to 4.8 Gbps wireless data rate, with Multi User MIMO support (Wi-Fi 6)
2.4 GHz 802.11ax 2x2 MIMO for up to 574 Mbps wireless data rate (Wi-Fi 6)
Antenna: Down-tilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 3.77 dBi in 2.4GHz and 4x4 MIMO with peak antenna gain of 4.55 dBi in 5GHz (of the effective, combined pattern for both antennas in each band)
LAN Ports: Uplink 2.5 Gigabit Ethernet port, with PoE-in support (802.3at)
DC power connector (12V) Bluetooth
Low Energy (BLE) radio LED status indicators
Reset/LED control button
Kensington security slot...
Security: Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Rogue AP Detection
802.1X Support
WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Interface: 1 x 10/100 Mbps Shielded Ethernet Port (Passive PoE in)
1 x Grounding Terminal
1 x Reset Button
PoE Adapter:
1 x AC Jack with Ground
1 x 10/100/1000Mbps Shielded Ethernet Port (Power + Data)