Primary Ports: 16 x Gigabit PoE+ Ports; 8 x Gigabit Ports; 2 x 100/1000Mbps SFP Ports
Weight: 3.7400
Features: • 16 x Gigabit PoE+ ports
• 8 x Gigabit ports
• 2 x 100/1000Mbps SFP ports
• Up to a 480 watt full PoE+ power budget
• 52Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-Rail and wall mounts
• Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
• Redundant power inputs with overload current protection
• Alarm output triggered by
Features: Adapter Features
Data Rate Supported: 100/50/25/10GbE per port
Bus Type/Bus Width: PCIe 4.0 x16
Note: full 200Gbps performance requires PCIe slot bifurcation enabled in the system BIOS
Hardware Certifications: BSMI, CE, CMIM, FCC, ICES, KCC, RCM, UKCA, cURus, and VCCI
BMSI RoHS and RoHS-compliant: Product is compliant with Taiwan Bureau of Standards, Metrology and Inspection (BMSI), and EU RoHS Directive 2 2011/65/EU (Directive 2011/65/EU) and its amendments (e.g. 2015/863/EU)
Controller: Intel® Ethernet Controller E810-CAM1 (two controllers per adapter)
Power Consumption
DAC's
100GbE (Typical Power) Max 21.8 W 29.6 W (Max Power)
Idle (no traffic) 19.2 W (Typical Power)
Optics
100GbE Max 25.3 W (Typical Power) 33.5 W (Max Power)
Idle (no traffic) 22.8 W (Typical Power)
QSFP28 Max Pow...
Network Media: WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled)
NAT Loopback Enable/Disable
NAT Modes: NAT, PAT, One-to-One NAT
VLAN tag assignment on WAN interface
IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP
Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels
IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6),...
Features: • IP30 rated industrial power supply with integrated DIN-rail mount
• Provides up to 120 Watts of power (48 V, 2.5 A)
• Built-in active PFC (PF > 0.93)
• Short circuit/overload/over voltage/over temperature protection
• High efficiency (91%) design
• UL 508 approved
• 100 % full load burn-in test
• Extreme -25 to 70 °C