Frequency Band: AP type: Outdoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO; 2.4 GHz radio: Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate with 2SS HE40 802.11ax client devices; 5 GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax client devices; 6 GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4 Gbps wireless data rate with 2SS HE160 802.11ax client devices; Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 8 for the 6GHz radio)
Interface: (1) 10/100/1000BASE-T RJ-45 port, auto-sensing link speed and MDI/MDX
(1) SFP Fiber port
Wireless Data Rates: Max bandwidths and peak data rate per band: 20/40 (2.4 GHz), 20/40/80 (5 GHz), 20/40/80/160 (6 GHz), and maximum peak data rate 3.6 Gbps
Frequency Band: 2.4 GHz and 5 GHz or 2.4 GHz and 6 GHz or 5 GHz and 6 GHz
Interface: Wired Network Interface: 1 x 2.5GbE, 4 x 1GbE
Ports:
Uplink (E0): Ethernet wired network port (RJ-45)
Downlink (E1-–E4): Ethernet wired network ports (RJ45)(E1 and E2: POE-PSE) USB 2.0 host interface (Type A connector)
Cellular radio module interface (accessible after removing the back cover) Serial console interface (proprietary, micro-B USB physical jack) Kensington security slot
Antenna: Integrated down tilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 5.3 dBi in 2.4 GHz, 6.0 dBi in 5 GHz (5.8 dBi in dual-5 GHz mode) and 6.0 dBi in 6 GHz (5.9 dBi in dual-6 GHz mode). Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The down tilt angle for maximum gain is roughly 30 to 40 degrees.
Interface: Ethernet Technology:
2.5 Gigabit Ethernet
Number of Network (RJ-45) Ports:
1
PoE (RJ-45) Port:
Yes
PoE PD Port:
Yes
Part Number: NWA90AXPRO
Antenna: Antenna Form Factor:
Internal
Certifications: Certifications & Standards:
FCC Part 15C
FCC Part 15E
ETSI EN 300 328
EN 301 893
LP0002
EN 60601-1-2
FCC Part 15B
EN 301 489-1
EN 301 489-17
EN55022
EN55024
EN61000-3-2/ -3
BSMI CNS13438
EN 60950-1
IEC 60950-1
BSMI CNS14336-1
Frequency Band: Indoor range up to 50m (In ideal conditions)
Outdoor range up to 300m (In clear view and ideal conditions)
2 internal QWL omnidirectional antennas
Modulation: GFSK
Radio frequency range:
1880 MHz to 1900 MHz (EU)
1920 MHz to 1930 MHz (US)
1902 MHz to 1906 MHz (TH)
1910 MHz to 1920 MHz (BR)
Transmission power: Average 10mW
RX sensitivity: typ. -91dBm
Power: AC 100-240V Input and DC 5V/600mA Output
Features: Extending the DECT coverage
Supports automatic handover of calls between RT30
Up to 4 simultaneous calls per repeater
Up to 6 repeaters per base station
Up to 2 repeaters can be arranged in cascade (only when connected to W60B/W70B)
Auto association
Base Link Reset
LED Display:
LED 1 Power On
LED 2 DECT Link
LED 3 Active Relay
Compatible with Yealink W60B (version 77.81.0.35 or l...
Wireless Data Rates: 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)
Interface: 1x Gigabit Ethernet uplink (10/100/1000BASE-T autosensing), PoE
3x Gigabit Ethernet local ports (10/100/1000BASE-T), including one PoE out port: PoE out provides 802.3af (Class 0) when access point is powered by 802.3at, or no output when powered by 802.3af
One passive pass-through port, RJ-45 (back to bottom)