Specifications: Cable Type: SFP+
Cable Length: 9.84 ft.
Connector on First End: 1 x SFP+ Network
Connector on Second End: 1 x SFP+ Network
Data Transfer Rate: 1.25 GB/s
Compatibility: Aruba 8320 Switch Series
Frequency Band: RF
Operating frequency* 57–71 Ghz
* Depends on regulatory region.
Channel bandwidth 2160, 1080 MHz
Polarization Vertically linear
Beamwidth Azimuth: 3 dB 1.6°
Elevation: 3 dB 1.6°
LEDs: Power Flashing white: bootup in progress
White: not connected to UISP application
Blue: connected to UISP application
Ethernet Flashing blue: Ethernet activity
GPS Blue: receiving at least (4) GPS satellite signals
60G Blue: active connection
Power Supply: Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply 48V DC, 0.65A gigabit PoE adapter (Included)
Supported voltage range 44–54V DC
22–27V DC
Specifications: Description: 8 Digital Inputs and 8 Digital Outputs
Digital Inputs: 8
Logic Level 0: -30.0V to +1.0V
Logic Level 1: +2.0V to +30V
Latched Inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged
Counter Inputs: User progammable- counts positive or negative transitions up to 100Hz
Watchdog: Active high/low, Pulsed high/low
Digital Outputs: 8
Digital Output Type: Open drain transistor, protected MosFET. Short circuit protection up to 36V. Over temperature shutdown -175°C typical 150°C min
Maximum Output Load Voltage: 30 VDC
Maximum Output Current Sink: 0.85A per channel
Serial Gateway: RS485 NuDam/ADAM compatible gateway
Number of Ports: 1
Network Port Type: RJ45 Jack 10/100 MHz Autosensing, Cross Over Autosensing (MDIX)
Network Protocols: ICMP, IP, TCP, DHCP, HTTP
Protection: 1500V M...
Specifications: Compatibility: Cisco FirePOWER Firewall, ASR9000 Router, ASR1000 Router, C9300 Switch, C3850 Switch
Cable Length: 32.81 ft
Data Transfer Rate: 10 Gbit/s
Features: Active, Hot-swappable
Cable Type: Twinaxial
Connector Type on First End: SFP+ Network - Male
Connector Type on Second End: SFP+ Network - Male
American Wire Gauge: 30 AWG
Connector on First End Details: 1 x SFP+ Network - Male
Connector on Second End Details1 x SFP+ Network – Male
Weight: 0.78lbs
Specifications: Compatible OEM: Industry Standard
Media Type: Copper
Data Rate: 1Gbs
Power Supply: 120V AC Power Cable
Media Conversion Type: Copper to Copper
Reach: 100m
Type: POE Injector
POE: POE++
Unmanaged
IEEE Standard 802.3bt
Additional Information Multi-Rate
Connector1 Number of Ports: 1
Connector2 Number of Ports: 1
Connector Types: RJ-45 & RJ-45
POE Watts: 60W
Specifications: Interface: LAN:
1 x RJ-45 STP, "Data" Input Port
POE: 1 x RJ-45 STP, "Data + Power" Output Port
AC Connector: 1 x AC Input power socket, IEC-320 C6
Network Cable:
Ultra PoE (60W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.)
802.3af / at PoE(15W / 30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
LED Indicator:
System: Power x 1 (Green)
PoE Port: Active, PoE ready / In Use x 1 (Green)
Data Rate: 10/100/1000 Mbps
Unit Output Voltage: DC 50-57V, 1.2A
Power Requirements: 100-240V AC @ 50/60 Hz, 1.5A max.
Power Consumption: 60 watts max.
PoE Standard:
Ultra PoE over 4-pairs UTP,
High Power over Ethernet End-Span / Mid-Span PSE
PoE Power Supply Type: End-Span + Mid-Span
Power Pin Assignment:
Pair 1 End-Span: 1/2 (+), 3/6 (-)
Pair 2 Mid-Span: 4/5 (+), 7/8 (-)
PoE Power Output:
DC 50-57V/60-w...
Specifications: Cable Type:
Twinaxial
Cable Length:
9.84 ft
Connector Type on First End:
SFP+ Network
Connector Gender on First End:
Male
Connector on First End Details:
1 x SFP+ Network
Connector Type on Second End:
SFP+ Network
Connector Gender on Second End:
Male
Connector on Second End Details:
1 x SFP+ Network
Conductor:
Copper
Device Supported:
Network Device
Frequency Band: Frequency Band: 2.4 GHz, 5 GHz
Performance: Maximum data rate (5 GHz): 1200 Mbps ¦ Maximum data rate (2.4 GHz): 574 Mbps
Capacity: Concurrent users: 256 ¦ Maximum number of configured SSIDs: 16
Interface: 1 x 1000Base-T (PoE) - RJ-45 ¦ 1 x USB 2.0 - Type A
Standards: IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n, IEEE 802.11k, IEEE 802.11r, IEEE 802.11v, IEEE 802.11ac Wave 2, EN 61000-4-2, EN 61000-4-3, EN 61000-4-5, UL 2043, RoHS, EN 60950-1, WEEE, EN 60601-1-2, EN 62311, EN 50121-4, IEC 61373, EN 50121-1, ISTA 2A
Specifications: Interfaces/Ports:
4 x RJ-45
1 x RJ-45
Data Transfer Rate: 230 Kbps Serial
Management:
Telnet
SNMP
Digi Port Authority-Remote
HTTP for easy browser configuration
Status Indicators: Link / Power
Input Voltage:
100 V AC to 240 V AC
9 V DC to 30 V DC
Input Current:
400 mA 12 V DC
500 mA 9 V DC to30 V DC
Specifications: Ethernet Interface:
Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X
Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device)
PoE Input: Supports both mid-span and end-span PSE
Input Range: 48~56V DC
Data Rate: 100/100 Mbps
Cabling: Cat5e or above
Maximum Distance: 100m
Maximum Frame Size: 1522 bytes
LED Indicators:
4 x LEDs
PWR
LRP LNK
PoE IN
LNK / ACTESD Protection: 4 KV DC
EFT Protection: 2 KV
Enclosure Metal: case
Installation: Wall mount or DIN rail with optional kit
Power Requirements:
RJ45 PoE Input: 802.3at/af 48~56V DC
DC Input: 48~56V DC
Standards Compliance:
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2)