Specifications: Interfaces/Ports
Total Number of Ports:
1
Network (RJ-45):
Yes
Number of PoE (RJ-45) Ports:
1
Media & Performance
Media Type Supported:
Optical Fiber
Twisted Pair
Fiber Mode Supported:
Multi-mode
Single-mode
I/ O Expansions
Total Number of Expansion Slots:
1
Expansion Slot Type:
SFP (mini-GBIC)
Number of SFP Slots:
1
Network & Communication
Ethernet Technology:
Gigabit Ethernet
Network Technology:
1000Base-T
1000Base-TX
100Base-TX
100Base-T
Power Description
Power Source:
PoE+
Power Consumption:
60 W
Plug/Connector Type:
Terminal Block (3 Wire)
Type N
Physical Characteristics
Form Factor:
DIN Rail Mountable
Wall Mountable
Height:
1.3"
Width:
3.2"
Depth:
4.1"
Weight (Approximate):
5.40 oz
Miscellaneous
P...
Specifications: Interface:
PoE (Power + Data) Input Port: 1 x RJ-45 STP
Data” Output Port: 1 x RJ-45 STP
DC Out Plug Connector: 1
LED Indicator System: PoE In x 1 (Green)
Network Cable:
10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.)
EIA / TIA-568 100-ohm STP (100m)
Data Rate: 10/100/1000 Mbps (varies on Ethernet device attached)
DIP Switch: 12V DC / 24V DC output voltage
Power Input: 802.3at PoE+ 52 ~ 56V DC
PoE Standard: IEEE 802.3at High Power over Ethernet
Number of clients device can be powered: 1
Power Output:
12V DC, 2A max
24V DC, 1A max
Standards Compliance:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3at...
Specifications: Cable Type: Fiber Optic
Cable Length: 6.56 ft
Connector on First End: 1 x SFP+ Network
Connector on Second End: 1 x SFP+ Network
Conductor: Copper
Device Supported: Network Device
Specifications: Hardware Version: 2
Interface:
"Data" Out Port:1 x RJ-45 STP
"PoE (Power + Data)" Input Port:1 x RJ-45 STP
DC Out Plug Connector:1
LED Indicator: System: 1 x PoE in Use (Green)
Network Cable: UTP Cat. 5/5e/6, up to 100m (328 ft.)
Data Rate: 10/100/1000 Mbps
PoE Standard: IEEE 802.3at Gigabit Power over Ethernet / PD
PoE Power Input: IEEE 802.3at 52~56V DC
DIP Switch: 5V DC / 12V DC output voltage
Number of devices that can be powered: 1
Standards Compliance IEEE 802.3 10BASE-T Ethernet:
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Specifications: Interface: Input Port:
1 x RJ-45 STP
PoE (Data + Power) In
Output Port
1 x RJ-45 STP
Data Out
DC Socket
DC Out
DIP-Switch
12V DC / 19V DC / 24V DC output voltage
LED Indicator:
System: Power x 1 (Green)
Network Cable:
Ultra PoE (60W): 10/100/1000Base-T: 4-Pair UTP Cat. 5e, 6 up to 100m (328 ft.)
802.3af/at PoE (15W / 30W): 10/100/1000Base-T: 2-Pair UTP Cat. 3, 5, 5e, 6 up to 100m (328 ft.)
Data Rate: 10/100/1000 Mbps
Power Requirements: 52 ~ 56V DC
Power Consumption: 50 watts (maximum)
Operating Temperature: 0 ~ 50 degrees C
Storage Temperature: -10 ~ 70 degrees C
Humidity: 5 ~ 95% (Non-condensing)
PoE Standard: IEEE 802.3at Power over Ethernet Plus
Power Output: DC 12V / 19V / 24V by DIP switch control
DC Plug connectors (Diameter):
2 external female plug cables:
5.5 / 2.5mm to 5.5 / 2.5mm
5.5 ...
Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (High Power over Ethernet)
PoE Power Supply Type: Mid-Span / Type B
PoE Power Output: 52V DC, 510 mA, Max. 26 watts
Power Pin Assignment: 4/5 (+), 7/8 (-)
Maximum Distance: 4 units, daisy-chain installation with 500m support
Data Rate: 10/100/1000 Mbps
Switch Architecture: Store-and-Forward
Maximum Frame Size: 1552 Bytes
Flow Control:
Back pressure for half-duplex
IEEE 802.3x pause frame for full-duplex
LED Indicators:
1 x PoE IN (Green)
1 x LAN Data (Green)
1 x PoE OUT (Green)
Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC
Power Consumption: 3.2 watts (system maximum)