Specifications: Interface
LAN: 1 x RJ45 STP, "Data" Input Port
PoE: 1 x RJ45 STP, "Data + Power" Output Port
AC Connector: 1 x AC input power socket, IEC-320 C6
Network Cable
Ultra PoE (60W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.)
802.3af/at PoE (15W/30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
LED Indicator
System: Power x 1 (green)
PoE Port: Active, PoE ready/in-use x 1 (green)
Data Rate: 10/100/1000Mbps
Unit Output Voltage: DC 56V, 1.08A
Power Requirements: 100 - 240V AC at 50/60Hz, 1.5A max.
Power Consumption: 60 watts max.
Temperature
0 - 50 degrees Celsius (Operating)
-10 - 70 degrees Celsius (Storage)
Humidity: 5 - 95%, relative humidity, non-condensing
PoE Standard:
Ultra PoE over 4-pair UTP cable
IEEE 802.3at Power over Ethernet Plus End-span/Mid-span PSE
PoE Power Supply Type: End-span + Mid-span ...
Frequency Band: Dual Radio for simultaneous dual-band operation
5 GHz 802.11ac 3x3 MIMO for up to 1,300 Mbps wireless data rate, with Multi User MIMO support (Wi-Fi 5)
2.4 GHz 802.11n 2x2 MIMO for up to 300 Mbps wireless data rate (Wi-Fi 4)
Standards: IEEE 802.11ac, 802.11n
Antenna: Integrated downtilt omni-directional antennas with maximum individual antenna gain of 3.9dBi in 2.4GHz and 5.4dBi in 5GHz
LAN Ports: (1) uplink Gigabit Ethernet port, with POE-in support (802.3af)
Specifications: Safety
IEC 60950-1, EN 60950-1, CB Certificate/Report, UL/CSA 60950-1
EMC
CC / ICES-003 Emission (USA/Canada)
CRISP 22 Emission (International)
EN61000-4-2 Electrostatic Discharge
EN61000-4-3 Radiated RFI Immunity
EN61000-4-4 Electrical Fast Transients level 4
EN61000-4-5 Electrical Surge Level
EN61000-4-6 RF Conducted
EN61000-4-8 Power Frequency Magnetic Fields
EN61000-4-11 Voltage Dips and Interruptions
EN61000-4-8 Power Frequency Magnetic Fields
EN61000-4-11 Voltage Dips and Interruptions
Features: • Industrial power supply with integrated DIN-rail mount
• Provides up to 240 Watts of power (48 V, 5 A)
• Built-in active PFC (PF > 0.93)
• Short circuit/overload/over voltage/over temperature protection
• High efficiency (94%) design
• UL 508 approved
• 100 % full load burn-in test
• Extreme -25 to 70 °C (-13 to
Features: • Supplies PoE (15.4W) and PoE+ (30W)
• Network a PoE device located up to 100 meters (328 ft.) away
• Converts a non-PoE gigabit port to a PoE gigabit port
• Save on installation and equipment costs
• Wall mountable for installation flexibility
• Built-in internal power supply
• IEEE 802.3af and IEEE 802.3at compliant
• NDAA / TAA compliant (U.S. and Canada only)
Features: • Converts a non-PoE 2.5G port to a PoE++ 2.5G port
• Supplies PoE (15.4W), PoE+ (30W), or PoE++ (90W)
• Network a PoE device up to 100m (328 ft.)
• Integrated power supply
• 2.5GBASE-T compliant
• IEEE 802.3af, 802.3at, and 802.3bt compliant
Features: Hardware
IP68
IK10
1.6mm SPHC hot rolled steel case
FIPFG sealing
Waterproof door lock
11 cable glands
Wall mount
Power
Input: 100-240V AC
Output: 200W, 55V DC 3.6A
Solid wire (AWG): 12-24/14-22
Stranded wire (AWG): 12-24/14-22
18 AWG power cable included
Operating Temperature
-30° – 70° C (-22° – 158° F)
Certifications
CE
FCC
UL 62368
CB IEC 62368
Package Contents
TI-CA3K
Quick Installation Guide
Wall mount accessories and power cable