Wired & Wireless Accessories

• Type: PoE+ Extender
• Color: Black
• Specifications: Hardware Port: 1 Industry Standards: IEEE 802.3af PoE, IEEE 802.3at PoE+ IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Performance Auto MDIX: Yes Auto-Negotiation: Yes Compatible Networks: 10/100/1000 Mbps Flow Control: Half-duplex back-pressure , IEEE 802.3x pause frame for full-duplex Full Duplex Support: Yes Jumbo Frame Support: No Maximum Cable Length: 328 ft. [100m] Maximum Data Transfer Rate: 2 Gbps (Full-Duplex) MTBF: 50,000 Hours Power Output: One extender-24W Power Output: Two extender daisy chain-20W Power Output: Three extender daisy chain-16W Power Output: Four extender daisy chain-12W Surge Protection: EN61000-4-2 (ESD)-2kV EN61000-4-5 (Surge)-2kV Switching Architecture: Store-and-Forward Connector Type(s): 2-RJ-45 Female Enclosure Type: Steel Indicators LED Indi...
• Model #: POEEXT1GAT

• Type: Kit
• Specifications: Video Channel: 4 channel bi-direction Video Connector: BNC Video Input / Output Impedance: 75 ohm / unbalanced interface Video Input / Output Voltage: 1.0 Vpp / Typical peak-peak value Video Bandwidth: 5 Hz to 6.5 MHz Video Digital Bit Width: 8/10 bit Differential Gain (DG): < 1.3% (Typical Value) Differential Phase (DP): < 1.3 degree (Typical Value) SNR Weighted: > 63 dB (Typical Value) Data Channel: 4 channels Physical Protocol: RS-485 Operation Mode: Simplex Data Connector: 4 Pin terminal block with screw clamps Data Rate: DC-150 Kbps Data Distance: RS-485: 0-20 Km BPS: 0-115.2 Kbps Bit Error Rate (BER): < 10-9 Optical Connector: FC Fiber Type: Single-mode, single fiber Distance: 20 km for single mode Optical Wavelength: VF-402-T:TX: 1310nm, RX: 1550nm VF-402-R:TX: 1550nm, RX: 1310nm Transmitter Couple Power: M...
• Model #: VF-402-KIT

• Type: PoE+ Injector
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt compatible Device Interface: 1 x Gigabit Data in port 1 x Gigabit Ultra PoE out port Metal Housing Power Input: 100-240V, 2A 50-60Hz Output: 52V, 1.38A PoE Budget: 60 watts max. Power Consumption: 5 watts max. (without PD) Temperature: 0 - 60 degree C (32 - 140 degree F) Humidity: Max. 95% non-condensing Dimension: 0.80" x 4.00" x 3.00" Weight: 0.41 lb.
• Parts: Manufacturers Limited Warranty: 3 Year / Parts Only
• Model #: TPE-117GI

• Brand: TRENDnet
• Part Number: TI-BEP200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Device Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE+ out port 1 x Gigabit 24/48V DC passive PoE out port LED indicators Wall mount IP67 housing Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB DIP Switch Adjust 24/48V DC passive voltage (default 48V DC)
• Model #: TI-BEP200

• Type: PoE Converter
• Specifications: Video Channel: 1 channel bi-direction Signal Mode: NTSC / PAL / SECAM Video Connector: BNC Video Bandwidth: 60MHz Video Input / Output Voltage: 1.0 Vpp / typical peak-to-peak value Video Input / Output Impedance: 75ohm / unbalanced interface Supported Video Type: 1080p: AHD / TVI / CVI 480p: CVBS Video Digital Bit Width: 8 / 10 bit Differential Gain (DG): < 1.3% (typical value) Differential Phase (DP): < 1.3 degree (typical value) SNR Weighted: > 67 dB (typical value) Data Channel: 1 channel Physical Protocol: RS485 Operation Mode: Simplex Data Connector: 3-pin terminal block with screw clamps Data Rate: DC-115.2 Kbps Bit Error Rate (BER): < 10ns LED Indicators: Power Video Link (fiber optic) Power Requirement: 5V DC, 2A Power Consumption: 4.8 watts (maximum) Mechanical: Metal Installation: Wall-mountable, DIN-rail (with ...
• Model #: VF-102G-KIT

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Type: PoE Injector
• Specifications: Interface: "Data" Input Ports: 8 x RJ45 "Data + Power" Output Ports: 8 x RJ45 Management Port: 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate: 10/100/1000Mbps LED System: SYS PWR x 1 (Green), PoE Failure x 1 (Red), Fan Failure x 2 (Red) Management port x 2: 1000 (Green), 10/100(Orange) Per PoE Port: Ultra 60W PoE-in-use x 1 (Green), 802.3at/af PoE-in-use x1 (Orange), PoE Power Usage LED x4 (Green) Power Requirements: 100 - 240V AC, 50/60 Hz, 6.5A Power Consumption: 520 watts (max.) / 1774BTU Ventilation: Fan x 3 Enclosure: Metal PoE Standard: IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus 4-pair Ultra PoE PoE Power Supply Type: End-span / Mid-span / UPoE (Ultra PoE) Power Pin Assignment: Pair 1 end-span: 1/2 (-), 3/6 (+) Pair 2 mid-span: 4/5 (+), 7/8 (-) UPoE: 1/2 (-), 3/...
• Model #: UPOE-800G

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

• Type: PoE Extender
• Specifications: Power consumption: 1.3 watts via POE Forwarded PoE Power: Up to 75 watts depending on standard Maximum current 0.7 amps on data pairs Maximum current 1.5 amps on spare pairs PoE Standards: IEEE 802.3af POE (15W) and IEEE 802.3at at POE Plus (2-event signature) (25-30W) IEEE 802.3bt POE (to 75W) Custom POE (incl. "always-on 48V" and "4-pair" POE) Ethernet Interface: Two independently auto-configuring 10/100 ports (10Base-T / 100Base-TX, half / full duplex) Patch or crossover cables supported LEDs Status indicators: Green LED - shows POE Power good Yellow LED - shows Ethernet link / activity Dimensions: 1.22" x 8.27" x 1.97" Weight: 0.23 lb. Mounting: 2/4 Bolt 7mm mounting holes. On 50/60mm centres Operating temperature: -40 degree C to 70 degree C [-40 degree F to 158 degree F] Relative humidity: Up to 85%, non-condensi...
• Model #: VOR-ORM-XT

• Type: PoE Splitter
• Color: White
• Specifications: Connectors: 2 x RJ-45, shielded, EIA 568A and 568B DC Jacks On unit: O.D x I.D = 2.5 x 6.4mm Ext. Cable #1: O.D x I.D = 5.5 x 2.5mm Ext. Cable #2: O.D x I.D = 3.4 x 1.4mm Data Rate: 10/100/1000 Electrical: Pin Assignment & Polarity: 3/6 (+),1/2 (-) or 4/5 (+),7/8 (-) Input voltage: 44 - 57 Vdc Input power: 70W max Output power: 54W max Output Current: 5A @ 12V; 2.5A @ 24V Indicators: Output Power Indicators: Green LED (4-pairs), Yellow LED (2-pairs) Thermal Rating: 38 BTU/Hr Reliability MTBF: 100,000 hours @ 25 degree C
• Model #: PD-AS-951/12-24

• Type: PoE Midspan
• Color: Black
• Specifications: No. of Ports: 12 Pass Through Data Rates 10/100/1000 Mbps PoE Output: Pin Assignment and Polarity: Data Pairs 1/2 (-) and 3/6 (+) Spare Pairs 7/8 (-) and 4/5 (+) Output Power Voltage: 54-57V DC User Port Power: 72W Typ. Aggregate Power: 1000W Input Power Requirements: AC Input Voltage: 100 to 240V AC DC Input: 57V (RPS or another 9500G midspan) AC Input Current: 450W Units: 5.5A @ 110V AC; 2.75A @ 220V AC 1000W Units: 12A @ 110V AC; 6A @ 220V AC AC Frequency: 50 to 60 Hz Management PowerView Pro included Indicators: System Indicator: AC Power (Green) User Indicator: Channel Power (Green / Orange) Connectors: PoE ports and management port: Shielded RJ-45, EIA 568A and 568B Console Port: USB Connector Type B DC Connector: DC Block Terminal RPS Com Connector: HD-D-sub-15
• Model #: PD-9512G/ACDC/M

• Type: Other
• Specifications: Video Channel: 1 channel bi-direction Signal Mode: NTSC / PAL / SECAM Video Connector: BNC Video Bandwidth: 60 MHz Video Input / Output Voltage: 1.0 Vpp / typical peak-to-peak value Video Input / Output Impedance: 75 ohm / unbalanced interface Supported Video Type: 1080p: AHD / TVI / CVI 480p: CVBS Video Digital Bit Width: 8/10 bit Differential Gain (DG): < 1.3% (typical value) Differential Phase (DP): < 1.3 degree (typical value) SNR Weighted: > 67 dB (typical value) Data Channel: 1 channel Physical Protocol: RS485 Operation Mode: Simplex Data Connector: 3-pin terminal block with screw clamps Data Rate: DC-115.2 Kbps Bit Error Rate (BER): < 10ns LED Indicators: Power Video Link (fiber optic) Power Requirement: 5V DC, 2A Power Consumption: 4.8 watts (maximum) Mechanical: Metal Installation: Wall-mountable, DIN-rail (with optional...
• Model #: VF-101G-KIT

• Type: Device Server
• Specifications: Processor: MPC852T Motorola 66 MHz Standard Memory: 32 MB RAM Maximum Memory: 8 MB Flash Memory Ports: 4 x RJ45 serial ports Flow Control: Hardware Flow Control Functions: The IOLAN SDS4 is ideal for connecting serial-based COM port, UDP or TCP socket based applications to remote devices. Perle's TruePort V5 re-director provides fixed TTY or COM ports to server based applications enabling communication with remote devices connected to Perle device servers. You can also tunnel serial data between devices across an IP network. Management: Web browser or secure web browser via https (SSL/TLS ), Perle DeviceManager software to manage single or multiple device servers, CLI -Telnet, SSH, shared console port SNMP, MIB II, Perle MIB, read and write Capabilities, SYSLOG, Port Buffering-local or 3DES encrypted ...
• Model #: 04030304

• Type: PoE Adapter
• Color: Black
• Specifications: Dimensions: 88 x 57 x 33 mm (3.5 x 2.2 x 1.3") Weight: 159 g (5.6 oz) Output voltage: 24V DC @ 1.0A LAN activity indicator: No Gigabit LAN port: Yes Remote reset capability: Yes Reset button: Yes Rated voltage: 100-240V AC @ 50/60Hz Input current: 0.6A @ 120V AC, 0.4A @ 240V AC Inrush current: <60A peak @ 120V AC, <120A peak @ 230V AC Efficiency: 80+% Output ripple: 1% Max. Switching frequency: 65 kHz Line regulation: <= 3% Load regulation: <= 5% 2-pair powering: Pins 4, 5 (+) and pins 7, 8 (-) 4-pair powering: - Storage temperature: -30 to 70°C (-22 to 158° F) Ambient operating temperature: 0 to 40° C (32 to 104° F) Ambient operating humidity: 35 to 95% noncondensing AC connector: IEC-320 C6 Data IN / PoE: RJ45 shielded socket Surge protection: Difference and common mode Clamping p...
• Model #: POE-24-24W-G

• Type: Ethernet Surge Protector
• Color: White
• Specifications: Interface Connector: 2 x RJ45 female connector DC Voltage: 90 V @ 100 V/s (Spark-over) Peak Impulse Current: 700 V @ 1 kV/µs Capacitance: 1.0 pF @ 1 MHz (maximum) Data Line Protection: RJ45 10/100/1000 Ethernet PoE: IEEE 802.3af support Shock and Vibration: ETSI300-019-1.4 Standard certified
• Model #: ETH-SP

• Type: PoE Splitter
• Color: White
• Specifications: Interface: PoE (Power + Data) Input Port: 1 x RJ-45 STP Data” Output Port: 1 x RJ-45 STP DC Out Plug Connector: 1 LED Indicator System: PoE In x 1 (Green) Network Cable: 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA / TIA-568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (varies on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE+ 52 ~ 56V DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of clients device can be powered: 1 Power Output: 12V DC, 2A max 24V DC, 1A max Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at...
• Model #: POE-162S

• Type: Expansion Module
• Specifications: Ports: 40 Gigabit QSFP+ x 1 Connectivity Technology: Wired Data Link Protocol: 40 Gigabit LAN Data Transfer Rate: 40 Gbps
• Model #: ICX7400-1X40GQ

• Type: Device Server
• Specifications: Ports: 16 RS-232 serial ports Throughput: Up to 230 Kbps Signal Support: TXD, RXD, RTS, CTS, DTR, DSR, DCD Ethernet: Physical Layer: 10/100 Base-T Data Rate: 10/100 Mbps Mode: Full or Half duplex USB: 2 ports at .5A max per port Power Input: 100-240 VAC, 50-60 Hz, 0.4A Surge Protection: 1 kV burst (EFT) per EN61000-4-4; 2 kV surge transient per Security: SSL, SSL/TLS, SSHv2, FIPS 197 (serial ports), SNMPv2, PPP Dimensions: 17.00" x 6.95" x 1.62" Weight: 5.00 lbs.
• Model #: 70002388

• Type: PoE Injector
• Specifications: Interface: "Data" Input Port: 1 x RJ-45 STP "PoE (Data+Power)" Output Port: 1 x RJ-45 STP Input power terminal block: 1 LED Indicator: System: Power 1, Power 2, Fault (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: 10Base-T: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000Mbps Dimension: 1.26" x 5.31" x 3.46" Weight: 1.05 lbs. Unit Input Voltage: 24 - 48V DC; 24V AC Power Consumption: 30 watts max. Number of device can be powered: 1 Installation: DIN rail kit and wall mount ear Alarm: Provides one relay output for power failure, Alarm relay current carry ability: 3A at DC 30V Enclosure: IP30 slim type metal case Power over Ethernet PoE Standard: IEEE 802.3at High ...
• Model #: IPOE-162

• Type: PoE Repeater
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit PoE/PoE+ in port 1 x Gigabit PoE/PoE+ out port 1 x Power port (optional power adapter is not included) LED indicators Installation mounting points Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Powered by PoE/PoE+ Device Consumption: 2 Watts (max.)
• Model #: TPE-E100

• Type: Other
• Specifications: Video Channel: 1 channel bi-direction Signal Mode: NTSC / PAL / SECAM Video Connector: BNC Video Bandwidth: 60 MHz Video Input / Output Voltage: 1.0 Vpp / typical peak-to-peak value Video Input / Output Impedance: 75 ohm / unbalanced interface Supported Video Type: 1080p: AHD / TVI / CVI 480p: CVBS Video Digital Bit Width: 8/10 bit Differential Gain (DG): < 1.3% (typical value) Differential Phase (DP): < 1.3 degree (typical value) SNR Weighted: > 67 dB (typical value) Data Channel: 1 channel Physical Protocol: RS485 Operation Mode: Simplex Data Connector: 3-pin terminal block with screw clamps Data Rate: DC-115.2 Kbps Bit Error Rate (BER): < 10ns LED Indicators: Power Video Link (fiber optic) Power Requirement: 5V DC, 2A Power Consumption: 4.8 watts (maximum) Mechanical: Metal Installation: Wall-mountable, DIN-rail (with optional...
• Model #: VF-106G-KIT

• Type: PoE Injector
• Specifications: Standards: IEEE 802.3af (Power over Ethernet) IEEE 802.3 (10Base-T Ethernet) IEEE 802.3u (100Base-TX Fast Ethernet) General: Media support: 100Base-TX Cat5 UTP/STP RJ-45, 8 pin Ports: 1 RJ-45 100 Mbps input port 1 RJ-45 100 Mbps data and power output ports 1 power input connector (3 pin) Protection functions: Short-circuit protection for short GND Overload protection for currents over 450 mA High-voltage protection for output voltage exceeding 52 V Compatibility - general: all IEEE 802.3af-compliant PoE devices Supported INTELLINET NETWORK SOLUTIONS products: Wireless 300N Access Points (524735, 524711) High Power Wireless G Access Point (503082) PoE Splitter (502900) Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR) Certifications: FCC Cla...
• Model #: 524179

• Type: Consumer Electronics
• Color: Black
• Specifications: Interfaces/Ports: 4 x RJ-45 1 x RJ-45 Data Transfer Rate: 230 Kbps Serial Management: Telnet SNMP Digi Port Authority-Remote HTTP for easy browser configuration Status Indicators: Link / Power Input Voltage: 100 V AC to 240 V AC 9 V DC to 30 V DC Input Current: 400 mA 12 V DC 500 mA 9 V DC to30 V DC
• Parts: 1 year limited
• Model #: 70001807

• Type: Antenna
• Specifications: Directivity: Omni-directional Frequency: 4.90 GHz to 5.88 GHz Antenna Gain: 5 dBi Connector Type: N-Type Form Factor: Direct / Pole Mount Application / Usaage: Wireless Data Network Application / Usage: Wireless Access Point Package Contents: ANT-2x2-5005 Antenna, Pole Mount Kit
• Model #: JW026A

• Type: Expansion Module
• Specifications: Form Factor: Plug-in module Ports: Gigabit Ethernet / 10Gb Ethernet x 4 Connectivity Technology: Wired Data Link Protocol: GigE, 10 GigE Data Transfer Rate: 10 Gbps Interfaces: 4 x 10GBase-T - RJ-45
• Model #: ICX7400-4X10GC

• Type: Cable
• Specifications: Cable Type: SFP+ Cable Length: 9.84 ft. Connector on First End: 1 x SFP+ Network Connector on Second End: 1 x SFP+ Network Data Transfer Rate: 1.25 GB/s Compatibility: Aruba 8320 Switch Series
• Model #: J9283D

• Type: Expansion module
• Specifications: Form Factor: Plug-in module Ports: 10Gb Ethernet x 8 Connectivity Technology: Wired Data Link Protocol: 10 GigE Interfaces: 8 x 10GBase-T - RJ-45
• Model #: AL7000MT1-E6

• Type: Other
• Color: Black
• Specifications: Standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z, IEEE 802.1P, IEEE 802.1q Data Rate Copper: 10/100/1000 Mbps Fiber: 1000 Mbps Filtering Addresses 8K MAC Addresses Max Frame Size 802.3ac tagged: 1628 bytes untagged: 1632 bytes Multimode Min TX PWR: -10.0 dBm Max TX PWR: -4.0 dBm RX Sensitivity: -17.0 dBm Max In PWR: 0.0 dBm Link Budget: 7.00 dB
• Model #: CGFEB1013-120

• Type: PoE Injector
• Color: Black
• Specifications: Interface: "Data" Input Port: 1 x RJ45 STP "PoE (Data + Power) Output Port: 1 x RJ45 STP AC Input Power Socket: 1 LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready-in-use x 1 (Green) Network Cable: 10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100BASE-TX: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) EIA/TIA-568 100-ohm STP (100m) Data Rate: 10/100 Mbps Unit Output Voltage: DC 53V, 0.6A Power Requirements: 100-240V AC, 50/60 Hz, 0.75A Power Consumption: 30 watts (max.) Number of Devices that can be powered: 1 PoE Standard: IEEE 802.3at Power over Ethernet Plus / PSE PoE Power Output: DC 53V / 30 watts PoE Power Supply Type: Mid-span Power Pin Assignment: 4/5 (+), 7/8 (-) Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE ...
• Model #: POE-164

• Type: PoE Injector
• Specifications: Standard & Protocol: Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af , IEEE802.3at Standard: CSMA / CD, TCP / IP Port: 1 GE port 1 data&power output port supporting PoE Indicator: PWR, PoE Power output: 30W Operation Temperature: 0 degree C ~ 40 degree C Storage temperature: -40 degree C ~ 70 degree C Operating Humidity: 10% ~ 90% (noncondensing) Storage Humidity: 5% ~ 90% (noncondensing) certification: CE / FCC / ROHS Dimension: 1.30" x 5.16" x 2.36"
• Model #: POE30G-AT

• Type: PoE Injector
• Color: Black
• Specifications: Interface: LAN: 1 x RJ-45 STP, "Data" Input Port POE: 1 x RJ-45 STP, "Data + Power" Output Port AC Connector: 1 x AC Input power socket, IEC-320 C6 Network Cable: Ultra PoE (60W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) 802.3af / at PoE(15W / 30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready / In Use x 1 (Green) Data Rate: 10/100/1000 Mbps Unit Output Voltage: DC 50-57V, 1.2A Power Requirements: 100-240V AC @ 50/60 Hz, 1.5A max. Power Consumption: 60 watts max. PoE Standard: Ultra PoE over 4-pairs UTP, High Power over Ethernet End-Span / Mid-Span PSE PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1 End-Span: 1/2 (+), 3/6 (-) Pair 2 Mid-Span: 4/5 (+), 7/8 (-) PoE Power Output: DC 50-57V/60-w...
• Model #: POE-173

• Type: PoE Injector
• Color: White
• Specifications: Hardware Version: version 2 Interface: "Data" Input Port:1 x RJ-45 STP "PoE (Data+Power)" Output Port:1 x RJ-45 STP DC 56V Input Power Socket:1 LED Indicator: System: Power x 1 (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps Unit Input Voltage: DC 56V, 0.53A Power Requirements: 100-240V AC, 50/60 Hz Power Consumption: 30 watts (max). Number of devices can be powered: 1 Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at High Power over Ethernet
• Model #: POE-161

• Type: PoE Adapter
• Specifications: AC input: 110 / 220V Data rate: 10/100/1000 Mbps DC output: 48V / 0.5A PoE standard: IEEE 802.3at
• Model #: POE-MPPTP

• Type: PoE Injector
• Color: Black
• Specifications: Interface: Input Port 1 x RJ-45 STP Data In Output Port 1 x RJ-45 STP PoE (Data + Power) Out DC socket 56V DC Input LED Indicator: System: Power x 1 (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: Ultra PoE (60W): 10/100/1000Base-T: 4-Pair UTP Cat. 5e, 6 up to 100m (328 ft.) 802.3af/at PoE(15W / 30W): 10/100/1000Base-T: 2-Pair UTP Cat. 3, 5, 5e, 6 up to 100m (328 ft.) Data Rate: 10/100/1000 Mbps Unit Input Voltage: DC 56V Power Requirements: External AC-to-DC adapter 100-240V AC, 50/60 Hz, 1.5A Power Consumption: 65 watts max. PoE Standard: IEEE 802.3at High Power over Ethernet End-span / Mid-span PSE Power Output: DC 56V / 60-watt PoE via 4-pairs DC 56V / 30-watt PoE via 2-pairs PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1: 1/2 (-), 3/6 (+) Pair 2: 4/5 (+), ...
• Model #: POE-171

OUT OF STOCK

• Type: PoE Midspan
• Color: Black
• Specifications: Data rate: 10/100/1000 Mbps Installation and management Power Selector: 15 W or 30 W Automatically detects PoE and High PoE-enabled devices and supplies inline power Local LED management display Input power AC Input Voltage: 100 to 240 V AC AC Frequency: 50-60 Hz Max. output power: 55 V DC (max. 60 W) Connectors Shielded RJ45, EIA 568A and 568B Power connector C13 Network
• Features: IEEE 802.3at 100 to 240 V AC Support for Axis PTZ domes Plug-and-play
• Model #: 5900-334

OUT OF STOCK

• Brand: Ubiquiti Networks
• Part Number: UACC-AOC-SFP10-5M
• Type: Cable
• Specifications: Connector type: SFP+ to SFP+ Cable length: 5 m / 16.4 ft Cable jacket: PVC Jacket OD: 3.0 mm Wavelength: 850 nm Supported data rates: 10 / 1 Gbps Jacket color: Aqua Ambient operating temperature: 0 to 70° C (32 to 158° F)
• Model #: UACC-AOC-SFP10-10M