Specifications: 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.]
Link Budget: 7.0 dB [50/125 µm fiber: 550 m/1804 ft.]
Standards: IEEE 802.3
Max Frame Size: untagged: 1632 bytes / tagged: 1628 bytes
Status LEDs:
PWR (Power): (below RJ-45)
ON = Lit for normal operation
FX-Link/Act (Fiber Link/Activity):
(Upper Left on RJ-45)
ON = Link; Flashing = Activity
TX-Link/Act (Copper Link/Activity):
(Upper Right on RJ-45)
ON = Link; Flashing = Activity
Power
Consumption: 3.15 Watts
Sources: Unit accepts 5 VDC to 28 VDC
Wall Mount AC adapter: 12 VDC 400mA
Environment
Storage: -15 to +65 °C
Operating: 0°C to 50°C
Altitude: 0 – 10,000 feet
Humidity: 5% to 95% (non-condensing)
Compliance
Safety: Wall Mount Power Supply, UL Listed,
C-UL Listed (Canada)
FCC Class A, CISPR22/EN55022...
Specifications: Processor: Freescale MPC8314, 400 MHz
Throughput: Up to 230 Kbps
Memory: 256 MB SDRAM / 34 MB Flash
Interfaces:
Serial Ports: 32 RS-232
Serial Connector: Digi 10-pin
Ethernet Physical Layer: Dual 10/100/1000 Mbps auto sensing; Full or half duplex
USB Ports: 2 USB 2.0 connectors; 500 mA max each port
Console Ports: 10-pin RJ-45 serial port for configuration
Power Input: 100-240 VAC, 50-60 Hz, 0.8A
Management: HTTP/HTTPS, CLI or telnet, SNMP read and write
Protocols: TCP/UDP, DHCP, telnet, Reverse telnet/SSHv2/SSL, IPv4/IPv6
Security: Encrypted RealPort, SSHv2, SSL
Dimensions: 8.7" x 17." x 1.8"
Weight: 5.7 lbs.
Specifications: xDirect232 Single Port RS232 10/100 Device Server
Serial Connectors: Single-port: DB9F RS232 (DCE Pinned)
Ethernet Interface: 10/100M RJ-45
Serial Interface Baud Rate: 300bps to 921.6 Kbps
LED Indicators: Power/Status, Link, Activity, Serial RX Activity & TX Activity
CPU: Based on DSTni-EX Enhanced 16-bit x86 Architecture
Memory: 256 KB SRAM, 1 MB Flash
100-240 VAC International Power Supply with Regional Adapters.
Specifications: xDirect PoE Single Port RS232/422/485 10/100 Device Server w/o Power Supply
Serial Connectors: Single-port: DB9F (RS232/RS422/RS485, DCE Pinned)
Ethernet Interface: 10/100M RJ-45
Serial Interface Baud Rate: 300bps to 921.6 Kbps
LED Indicators: Power/Status, Link, Activity, Serial RX Activity & TX Activity
CPU: Based on DSTni-EX Enhanced 16-bit x86 Architecture
Memory: 256 KB SRAM, 1 MB Flash
*No Power Supply