Wired & Wireless Accessories

• Model #: CA433U

Limited time offer, ends 01/27

• Model #: 560557109651

• Type: Accessories
• Color: Black
• Dimensions: 19.560 x 14.760 x 4.960
• Weight: 33.5000
• Model #: UISP-BOX-PLUS

• Model #: R426239503391272

• Brand: Denlane
• Type: RJ45
• Connector A: RJ45
• Connector B: RJ45
• Model #: 193161326800

• Model #: C280-3026

• Model #: RBFTC11

• Model #: STARWELL257710947594Lan

• Model #: 324589312263

• Model #: B07XSJ7D23-RT

• Model #: 9391048944618

• Brand: TRENDnet
• Part Number: TI-CA3K
• Features: Hardware IP68 IK10 1.6mm SPHC hot rolled steel case FIPFG sealing Waterproof door lock 11 cable glands Wall mount Power Input: 100-240V AC Output: 200W, 55V DC 3.6A Solid wire (AWG): 12-24/14-22 Stranded wire (AWG): 12-24/14-22 18 AWG power cable included Operating Temperature -30° – 70° C (-22° – 158° F) Certifications CE FCC UL 62368 CB IEC 62368 Package Contents TI-CA3K Quick Installation Guide Wall mount accessories and power cable
• Model #: TI-CA3K

• Model #: R406239503391111

• Brand: TRENDnet
• Part Number: TI-IG290
• Type: PoE Injector
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt IEEE 802.3bz Device Interface 2 x 2.5GBASE-T ports 2 x 2.5GBASE-T PoE++ ports 4-pin removable terminal block LED indicators DIN-Rail mount Wall mount Grounding point Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) 2.5 Gigabit: 5000Mbps (full duplex) Terminal Block Redundant power inputs, 4 pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG): 12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque: 5 lb. – In / 0.5Nm / 0.56 Nm Wire strip length: 7-8mm MTBF 716,685 hours Housing IP30 metal case DIN-rail mount Wall mount Grounding poi...
• Model #: TI-IG290

• Model #: R415239503391173

• Model #: TL-PI90X

• Model #: STARWELL257710949390Lan

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45 auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE-in-use LNK / ACT ESD Protection: 4KV DC Enclosure: Metal case Installation: Wall mount or DIN rail with optional kit Power Requirements: BNC Power over Coaxial Input: 44~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet Plus(802.3at Type 2)
• Model #: LRP-101CE

• Part Number: ST3300GU3B
• Type: Aluminum USB 3.0 Hub w/ GbE Adapter
• Specifications: Technical Information Host Interface: USB 3.0 Type A Interfaces/Ports Total Number of USB Ports: 3 Number of USB 3.0 Ports: 3 Number of Network (RJ-45) Ports: 1 Software Operating System Supported: Windows XP Windows Vista Windows 7 Windows 8 Windows 8.1 Windows 10 Windows 11 Windows Server 2003 Windows Server 2008 R2 Windows Server 2012 Windows Server 2012 R2 Windows Server 2016 Windows Server 2019 Windows Server 2022 Mac OS X 10.6 Snow Leopard Mac OS X 10.8 Mountain Lion Mac OS X 10.10 Yosemite Mac OS X 10.11 El Capitan Mac OS X 10.12 Sierra Mac OS X 10.13 High Sierra Mac OS X 10.14 Mojave Mac OS X 10.15 Catalina Mac OS X 11.0 Big Sur Mac OS X 12.0 Monterey Mac OS X 13.0 Ventura ChromeOS Linux 2.6.x Physical Characteristic...
• Model #: ST3300GU3B

• Model #: STARWELL257710947679Lan

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Model #: RackMount Kit-19

• Model #: R436239503391357

• Type: PoE Injector
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE IN LNK / ACTESD Protection: 4 KV DC EFT Protection: 2 KV Enclosure Metal: case Installation: Wall mount or DIN rail with optional kit Power Requirements: RJ45 PoE Input: 802.3at/af 48~56V DC DC Input: 48~56V DCStandards Compliance: Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet (802.3at Type 2)
• Model #: LRP-101CH

• Type: PoE Injector
• Specifications: Interface: "Data" Input Port: 1 x RJ-45 STP "PoE (Data+Power)" Output Port: 1 x RJ-45 STP Input power terminal block: 1 LED Indicator: System: Power 1, Power 2, Fault (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: 10Base-T: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000Mbps Dimension: 1.26" x 5.31" x 3.46" Weight: 1.05 lbs. Unit Input Voltage: 24 - 48V DC; 24V AC Power Consumption: 30 watts max. Number of device can be powered: 1 Installation: DIN rail kit and wall mount ear Alarm: Provides one relay output for power failure, Alarm relay current carry ability: 3A at DC 30V Enclosure: IP30 slim type metal case Power over Ethernet PoE Standard: IEEE 802.3at High ...
• Model #: IPOE-162

(2)

• Type: Other
• Specifications: Interface: 2 x 10/100 Mbps Ethernet Port 1 x USB 2.0 Port for configuration backup 1 x Micro USB Port for power Power Supply: 802.3af/at PoE or Micro USB (DC 5V / 1A) Power Consumption: 5W Management Scale: 50 EAPs Wireless Fuction: L3 Management Multi-SSID Load Balance Band Steering Airtime Fairness Beamforming Rate Limit Wireless Schedule QoS Wireless Security: WEP / WPA-PSK / WPA2-PSK / WPA / WPA2 Encryption Access Control SSID to VLAN Mapping Guest Network AP Management: Support Omada EAP Series Cloud Access Omada App Support Reboot& Wireless Schedule Auto Backup & Restore Batch Firmware Upgrade Authentication: WPA Personal and Enterprose Captive Portal Facebook login SMS authentication Voucher authentication Certification: FCC, RoHS Package Contents: Omada Cloud Controller OC200 Quick Installation Guide Ethernet Cab...
• Model #: OC200

(1)

• Model #: RackMount Kit-13

• Type: Hardware Controller
• Color: Black
• Specifications: Interface: 2 x 10/100/1000 Mbps Ethernet Ports, 1 x USB 3.0 Port Power Supply: 100-240 V~50/60 Hz, 0.6 A Dimensions: 11.60" x 7.10" x 1.70" Operating Temperature: 0-50 °C (32 - 122 °F) Storage Temperature: -40-70 °C (-40 - 158 °F) Operating Humidity: 10-90% RH non-condensing Storage Humidity: 5-90% RH non-condensing Package Cotent: - Omada Hardware Controller OC300 - Quick Installation Guide - Ethernet Cable - Power Cord - Rackmount Kit
• Model #: OC300

• Type: PoE++ Injector
• Color: Black
• Specifications: Standards and Protocols: IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3at, IEEE802.3bt Certification: FCC, CE, RoHS Environment: Operating Temperature: 0°C to 45°C (32°F to 113°F) Storage Temperature: -40°C to 70°C (-40°F to 158°F) Operating Humidity: 10% to 90%RH non-condensing Storage Humidity: 5% to 90%RH non-condensing Material: Metal Casing Network Media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m) EIA/TIA-568 100 ohm STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m) EIA/TIA-568 100 ohm STP (maximum 100 m) 1000BASE-T: UTP category 5, 5e, 6 cable(maximum 100 m) Ports: 1 10/100/1000Mbps RJ45 data-in port 1 10/100/1000Mbps RJ45 power+data-out port 1 AC socket Power Consumption: Input: 100-240 V, 50/60 Hz, 1.6A Output: Auto-determine the necessary pow...
• Model #: TL-PoE170S

• Model #: B3EW.1121115

Limited time offer, ends 01/30

• Model #: 981362210873

• Model #: 9158154889017

• Model #: STARWELL257710951904Lan

Limited time offer, ends 01/29

• Model #: 9469881942679

OUT OF STOCK

• Type: PoE Injector
• Color: Black
• Model #: 508216

OUT OF STOCK

• Type: PoE Injector
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both mid-span and end-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100m Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE IN LNK / ACTESD Protection: 4 KV DC EFT Protection: 2 KV Enclosure Metal: case Installation: Wall mount or DIN rail with optional kit Power Requirements: RJ45 PoE Input: 802.3at/af 48~56V DC DC Input: 48~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet (802.3at Type 2)
• Model #: LRP-101UH