Your Browsing History
Meet Your Seller
Visit EmpressTech Store
FOLLOW
A2212 1400kv Brushless Outrunner Motor 10t+ 30a Speed Controller ESC,Rc Aircraft Kk Quadcopter UFO (1 Pack)
Limited time offer, ends 07/12 By EmpressTech
- 1400kv Brushless Motor; DT-30A Brushless ESC; Max Efficiency: 80%; Motor Dimensions: 27.5 x 30mm; Shaft Diameter: 3.17mm
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
A2212 1400KV
MOTOR KV: 1400
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s No Load
Current @ 10V: 0.5A No.
Of Cells: 2-3 Li-Poly
Motor Dimensions: 27.5 x 30mm
Shaft Diameter: 3.17 mm
Weight: 47g
DT-30A Brushless ESC ATTENTION: This ESC do not have the English instruction. Before producing, the manufacturer have set up the program, the ESC do not need additional program. The ESC need to be calibrated before you use
Here is the calibration steps: Turn on the remote control, adjust the throttle to the highest, power on, turn off the power after hearing the slow beep. Power on again, after the two drops are heard, the throttle is adjusted to the lowest level. After hearing the long beep, turn off the power, turn off the remote control, the ESC calibration is completed.
Pls note: Do not install propellers when you calibrate ESC, otherwise it is dangerous.
MOTOR KV: 1400
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s No Load
Current @ 10V: 0.5A No.
Of Cells: 2-3 Li-Poly
Motor Dimensions: 27.5 x 30mm
Shaft Diameter: 3.17 mm
Weight: 47g
DT-30A Brushless ESC ATTENTION: This ESC do not have the English instruction. Before producing, the manufacturer have set up the program, the ESC do not need additional program. The ESC need to be calibrated before you use
Here is the calibration steps: Turn on the remote control, adjust the throttle to the highest, power on, turn off the power after hearing the slow beep. Power on again, after the two drops are heard, the throttle is adjusted to the lowest level. After hearing the long beep, turn off the power, turn off the remote control, the ESC calibration is completed.
Pls note: Do not install propellers when you calibrate ESC, otherwise it is dangerous.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by EmpressTech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...