Specifications: Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
IEEE 802.3bt
Device Interface
1 x Gigabit PoE++ in port
1 x Gigabit PoE+ out port
1 x Gigabit 24/48V DC passive PoE out port
LED indicators
Wall mount
IP67 housing
Data Transfer Rate
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit: 2000Mbps (full duplex)
Performance
RAM buffer: 1Mb
MAC Address Table: 2K entries
Jumbo Frame: 9KB
DIP Switch
Adjust 24/48V DC passive voltage (default 48V DC)
Specifications: Multipurpose mounting bracket for indoor AP's supports mounting to hard wall, ceiling, pole or truss. Supports padlock security with ZoneFlex R710.
Kit Content:
1 x Sheet metal mounting bracket
2 x #6 wood screws & anchors
Specifications: Ports: 16 RS-232 serial ports
Throughput: Up to 230 Kbps
Signal Support: TXD, RXD, RTS, CTS, DTR, DSR, DCD
Ethernet:
Physical Layer: 10/100 Base-T
Data Rate: 10/100 Mbps
Mode: Full or Half duplex
USB: 2 ports at .5A max per port
Power Input: 100-240 VAC, 50-60 Hz, 0.4A
Surge Protection: 1 kV burst (EFT) per EN61000-4-4; 2 kV surge transient per
Security: SSL, SSL/TLS, SSHv2, FIPS 197 (serial ports), SNMPv2, PPP
Dimensions: 17.00" x 6.95" x 1.62"
Weight: 5.00 lbs.