Wired & Wireless Accessories

• Brand: YuLinca
• Part Number: PGN301-EU-NEW
• Primary Port Speed: 1000 megabits_per_second
• PoE Ports: 2 Port / 30W
• Model #: 830599172274

• Type: PoE Splitter
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af Device Interface: 1 x Gigabit data/power in port 1 x Gigabit data out port 1 x Power out port LED indicators Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Jumper Cable: 2.0 to 2.0 mm 2.0 to 2.5 mm Power: PoE network cable input: 48 V DC, 0.38 A Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A) Consumption: 0.3 Watts (max.)
• Model #: TPE-104GS

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Brand: TRENDnet
• Part Number: TI-BEP200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Device Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE+ out port 1 x Gigabit 24/48V DC passive PoE out port LED indicators Wall mount IP67 housing Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB DIP Switch Adjust 24/48V DC passive voltage (default 48V DC)
• Model #: TI-BEP200

• Brand: YuLinca
• Uplink Interface: RJ45
• Primary Ports: RJ45
• Primary Port Speed: 10 gigabits_per_second
• Model #: 725842971429

• Type: PoE Extender
• Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet) IEEE 802.3at (High Power over Ethernet) PoE Power Supply Type: Mid-Span / Type B PoE Power Output: 52V DC, 510 mA, Max. 26 watts Power Pin Assignment: 4/5 (+), 7/8 (-) Maximum Distance: 4 units, daisy-chain installation with 500m support Data Rate: 10/100/1000 Mbps Switch Architecture: Store-and-Forward Maximum Frame Size: 1552 Bytes Flow Control: Back pressure for half-duplex IEEE 802.3x pause frame for full-duplex LED Indicators: 1 x PoE IN (Green) 1 x LAN Data (Green) 1 x PoE OUT (Green) Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC Power Consumption: 3.2 watts (system maximum)
• Model #: POE-E201

• Model #: 9046581031904

• Model #: STARWELL257710951836Lan

• Model #: B3B85298914982028

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

OUT OF STOCK

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 1.04 lbs. Power Requirements: DC 12~48V, 5A max. Unit Output Voltage: DC 54V Power Consumption: 120 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 4 IEEE 802.3at Power over Ethernet Plus Package Contents: IPOE-171-95W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-95W