-- Aigital 1200Mbps Dual Band WiFi Extender with Newest Chip --
Transmission Rate: 1200Mbps
Supported Band: 5GHz (867Mbps ) & 2.4GHz (300Mbps)
Wireless Standard: IEEE802.11ac/a/b/g/n
4x 5dBi High Gain Antennas
10/100Mbps Ethernet/LAN Port
What's the Difference between 5G signal and 2.4G signal?
5G WiFi Signal:
Pros: Fast Speed, Less Interference, More Stable
Cons: Short coverage range, More signal lose, Weak wall penetration.
2.4G WiFi Signal:
Pros: Less signal lose, Long coverage range, strong wall penetration
Cons: Slow speed, More interference
Some Knowledge about 5G wifi and 5G phone data:
In wifi, 5G means 5GHz, it means WLAN frequency, its wifi range depends on your home Broadband network speed and wifi router ability. 4G/5G phone data means 4 or 5 Generation, in the future it will be 6G 7G,etc.
What's the Difference between Adding a WiFi Extender and No WiFi Extender?
A WiFi Router is not enough to cover a whole house, so some areas that are far away from the wifi router will become wifi dead zones, you will meet signal buffering and lagging there, which influenced surfing experience seriously.
-- Add a WiFi Extender between the WiFi Router and the WiFi Dead Zones, it will help to bring the wifi signal to WiFi Dead Zones, so you can use wifi connection without buffering.
3 Working Modes:
Repeater Mode
Easily extend wifi signal range wirelessly, which is easier and more convenient. -- The most popular mode.
AP Mode
Easily create a new wifi hot spot for sharing, which is convenient as a guest network.
Router Mode
Easily create wired and wireless network, which is useful if you don't have a WiFi Router.
LAN Connection
With a 10/100Mbps LAN Port, when you use Wireless connection, you can also wired link to some devices at the same time, which brings more stable connection.
Wide Compatibility
Built-in newest chip, it's in accordance with 802.11 ac/b/g/n standard, and compatible with 802.11ac/b/g/n wifi routers, modem, and terminal devices, such as computer, smart TV, laptop, smart phone, pad, smart plug/bulb, doorbell, monitor, printer, etc, widely apply to home/office devices.
Frequent Questions and Answers
Q1: This WiFi Extender has 3 working modes. Which one should I select?
A1: If you don't have wifi router at home, please select Router Mode; If you want to create a wifi hot spot, please select AP Mode; If you want to boost your home wifi range wirelessly, please select Repeater Mode.
Q2: Do I need to connect Ethernet cable while using Repeater Mode?
A2: For Repeater mode, no, you don't need to connect Ethernet cable with your home wifi router. Repeater mode connects with your home wifi signal then boosts range. It's wireless connection, which is more convenient. For Router Mode and AP Mode, you need to connect this device with your home wifi router via Ethernet cable.
Q3: I only have 2.4G wifi signal, could I use this to have both 5G and 2.4G signals?
A3: Yes, you can. This is dual band wifi extender. It supports both 5G and 2.G signal. If you only have 2.G signal at home, this wifi extender could help to create both 5G and 2.4G signal for connection.
Q4: Do I need to download any APP or Driver to install it?
A4: No, you don't. You can set it up using phone or computer, no need APP or driver, all setup could be finished through web page. No need technology knowledge.