Features: 4 x Gigabit PoE+ ports
1 x Gigabit port
2 x Gigabit SFP ports
Up to 120W PoE power budget
Hardened IP50 rated metal switch
Extreme operating temperature range of -40° – 75°C (-40° – 167°F)
Dual inputs provide redundant power with overload current protection
Alarm relay triggered by power failure
14Gbps switching capacity
Includes DIN-Rail mount and wall
Features: • 16 x Gigabit PoE+ ports
• 32Gbps switching capacity
• 246W PoE power budget
• Extend PoE+ signal up to 250m (820 ft.) at 10Mbps on ports 1 – 8
• DIP switch supports VLAN port isolation and storm control
• Smart Fans
• Reduces equipment cost by delivering data and power over existing network cables
• 1U 19” rack mountable metal housing with
Features: • 4 x Gigabit PoE+ ports
• 1 x Gigabit port
• Up to 120W PoE power budget
• Hardened IP50 rated metal switch
• Extreme operating temperature range of -40° – 75°C (-40° – 167°F)
• Dual inputs provide redundant power with overload current protection
• 10Gbps switching capacity
• Includes DIN-Rail mount and wall mount brackets
• Power supply sold separately (model: TI-S15052)
• NDAA / TAA
Features: 5 x Fast Ethernet ports
1Gbps switching capacity
Hardened IP50 rated aluminum switch
Extreme operating temperature range of -40° – 75° C (40° – 167° F)
Dual power inputs provide redundant power with overload current protection
Fanless design for silent operation
Includes DIN-Rail mount and wall mount brackets
Power supply sold separately (model: TI-M6024)
NDAA / TAA compliant
Lifetime
Primary Ports: 8 x Gigabit PoE+ ports
2 x Gigabit SFP slots (1000Base-FX)
6-pin removable terminal block
LED indicators
DIN-Rail mount
Wall mount
Grounding point
Features: • 4 x Gigabit PoE+ ports
• 1 x Gigabit SFP slot
• 120W PoE power budget
• 10Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-Rail and wall mounts
• Operating temperature range of -20° – 65°C (-4° – 149°F)
• Redundant power inputs with overload current protection
• Alarm output triggered by power
Features: • 16 x Gigabit PoE+ ports
• 240W PoE power budget
• 32Gbps switching capacity
• Power supply sold separately (models: TI-S24052, TI-S24048, TI-S48048)
• Hardened IP30 rated metal switch
• Includes DIN-rail and wall mounts
• Operating temperature range of -40° – 75° C (-40° – 167° F)
• Dual redundant power inputs with overload current
Network Media: WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled)
NAT Loopback Enable/Disable
NAT Modes: NAT, PAT, One-to-One NAT
VLAN tag assignment on WAN interface
IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP
Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels
IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6),...
Primary Ports: 16 x Gigabit PoE+ Ports; 8 x Gigabit Ports; 2 x 100/1000Mbps SFP Ports
Weight: 3.7400
Features: • 16 x Gigabit PoE+ ports
• 8 x Gigabit ports
• 2 x 100/1000Mbps SFP ports
• Up to a 480 watt full PoE+ power budget
• 52Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-Rail and wall mounts
• Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
• Redundant power inputs with overload current protection
• Alarm output triggered by
Primary Ports: 8 x Gigabit ports
2 x Gigabit Ethernet ports
2 x Shared SFP slots
6-pin removable terminal block
LED indicators
DIN-Rail mount
Wall mount
Grounding point
Network Management Type: HTTP web-based GUI
CLI: Telnet / SSHv2
SNMP v1, v2c, v3
SNMP trap (up to 5 receivers)
RMON groups 1/2/3/9
Device configuration backup & restore, upgrade firmware, reboot, and reset to default
Multiple administrative or read-only user accounts
Enable or disable power saving mode per port
Static MAC entries
LLDP (Link layer discovery protocol)
Netlite device map
ONVIF device discovery
SNTP
SMTP alert
Syslog
Port statistics/utilization
Traffic monitor
Port mirror: one to one, many to one
Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
Loop...
Features: • 16 x Gigabit PoE++ ports
• 2 x Gigabit SFP ports
• Fast PoE minimizes wait time for powering up PoE devices
• 440W PoE power budget
• 36Gbps switching capacity
• Internal power supply
• Support VLAN pass through
• Sturdy 1U 19” rack mountable metal housing
• Lifetime Warranty
• NDAA / TAA compliant (U.S. and
Features: • 8 x Gigabit PoE+ ports
• Internal power supply
• Up to 30W per port with 110W total power budget
• Reduces equipment cost by delivering data and power over existing network cables
• Fanless design for silent operation
• 16Gbps switching capacity
• Sturdy rack mountable metal housing
• Use with TRENDnet's PoE splitter to network and power non-PoE devices
• NDAA / TAA compliant
Features: • 4 x Gigabit PoE+ ports
• 1 x Gigabit port
• 120W PoE power budget
• 10Gbps switching capacity
• Supports jumbo frames up to 9KB
• Hardened IP40 rated metal housing
• Includes DIN-Rail bracket and magnetic wall mount kit
• Operating temperature range of -40° – 75° C (-40° – 167° F)
• Redundant power inputs with overload current protection
• Alarm relay triggered by power
Features: • 8 x Gigabit PoE+ ports
• 200W PoE power budget
• 16Gbps switching capacity
• Supports jumbo frames up to 9KB
• Hardened IP40 rated metal housing
• Includes DIN-Rail bracket and magnetic wall mount kit
• Operating temperature range of -40° – 75° C (-40° – 167° F)