Specifications: This converter can support up to three drives simultaneously; Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Compatible Systems: Windows8/7/10/Vista/XP/Mac OS 9/10/Linux; Supports drives with a capacity of up to 6 TB; Support speed up to 5Gbps; Backward compatible with USB 2.0/1.1; On/Off Switch for HDD protection; DC Power Supply 12V for 3.5" devices; LED activity indicator, Plug & Play, simple, reliable and stable
Package Contents: USB 3.0 to Sata /IDE converter x1pc USB 3.0 male to male cable 3ft x1pc 12V/2A (DC5.5*2.1) power adapter x1pc Molex 4pin power cable x1pc
Specifications: Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in & 3.5in
Interface : USB 3.1 Gen 2
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 6TB
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
LED Indicators: 1 - Power and Activity
Center Tip Polarity: Positive
Input Current: 0.6 A
Input Voltage: 110 ~ 240 AC
Output Current: 2.0 A
Output Voltage: 12 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity of up to 6TB.
Backward compatible with USB 2.0/1.1.
DC Power Supply 12V included for 3.5" devices.
On/Off Switch for HDD protection.
Pluy & Play, reliable and stable.
Specifications: Interface: USB 3.0
Support Devices: IDE & SATA I/II/III, SSDs, Hard Drives, CD/DVD/Blu-ray Drives
Drive Size: 2.5" & 3.5" & 5.25"
LED Indicators: 1 x IDE; 1 x SATA; 1 x USB; 1 x Power
System Requirements:
Microsoft Windows XP, Vista, 7, 8.1, 10 (32 or 64 bit)
Mac OS X v10.6 and Up
Linux OS
USB 3.0 or 2.0 Equipped System
For USB 3.0 Speeds, the System Must Support USB 3.0 Specification
Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Changer Type: M.2 NGFF (SATA) SSD to 2.5" SATA 22PIN
Specifications: Type: B-key M.2 NGFF SATA-bus SSD to 2.5" SATA Interface. Compatible: B-Key M.2 NGFF SSD 2230/2242/2260/2280mm. Height: 9.7mm. Demension: 9.7cm x 7cm x 0.97cm / 3.82inch x 2.76inch x 0.38inch. Suiltable: for desktop or laptop hard drive bay.