Features: Connect to USB portable chargers or battery power-banks with USB 2.0/3.0 to devices with Type-C USB connector for fast charging
Fast Data transfers/sync
Reversible connector, plug and unplug easily without having to check the connector orientation
New type-C connector is capable of rapid charging devices when connected to USB wall charger.
Supported Speeds: USB 3.1(10.Gbps), USB 3.0(5Gbps), USB 2.0(480Mbps), Full(12Mbps), Low(1.5Mbps)
Can Support Typce-C supported devices such as the Nexus 6P, Nexus 5X, Macbook 12", ChromeBook Pixel, and other devices using Typce-C port.
Flexible cable, sturdy construction, and USB connectors with molded strain relief for frequent unplugging
Specifications: Interfaces
Serial
4 x Programmable Bi-directional RS-232/422/485 Port
(4 x DB9 Male Connector, configurable via pin assignments);
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd;
Flow Control: None (default) RTS/CTS
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A
Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)