Specifications: Active or Passive Adapter: Active
AV Input: HDMI
AV Output: Audio RCA, Composite
Industry Standards: Standard HDMI, DVI 1.0
Audio Specifications:
Input - LPCM 2Ch, 48kHz
Output - Stereo L/R
Supported Resolutions:
Input
TV - 1080p, 720p, 576p, 480p @ 60Hz
PC - 1920x1080, 1280x800, 1280x768, 1224x768, 800x600, 640x480 @ 60Hz
Output: 480i, 576p
Input Current: 0.4 A
Input Voltage: 100 ~ 240 AC
Output Current: 2000 mA
Output Voltage: 5 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: IDATA HDMI-EA lets you extract the audio signal from the HDMI source and convert it to analog RCA SPDIF + R / L audio.
It allows you to easily send the HDMI video signal to a TV, projector or monitor and send the HDMI audio signals to external speakers.
HDMI Resolution: 24/50 / 60fs / 1080p / 1080i / 720p / 576p / 576i / 480p / 480i
color video format supported: 24bit deep color 30bit, 36bit
Audio Outputs: L / R + SPDIF
Video bandwidth: 225MHz / 6.75Gbps
HDMI input cables Distance: =15m AWG26
HDMI output cable distance: = 20m AWG26
Maximum Operating Current: 500mA
Sound mode
ADV: The HDMI signal (audio + video) is simply looped-through via the device, no division is made between video and audio
2.0CH: the HDMI signal is converted to Toslink and RCA (stereo, R / L)
5.1CH: conver...
Max Extend Distance: CATx: 328 feet. (100 m); single-mode fiber (SFP): up to 30 km
Color: Black
Specifications: HDMI 4K video over IP
This attractively priced IP video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI 4K video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load.
Plug-and-play setup
Because the transmitter and receiver install directly into your existing LAN infrastructure, integration is easy. And you don't have to configure any IP settings. Connect your source, your display, a network switch, and you're ready go.
PoE support for remote powering
The MediaCento IPX 4K is PoE powered eliminating the need for power supplies. Using a PoE netwo...
Specifications: Video bandwidth: 300Mbps / 9Gbps
Input ports: 1 x HDMI
Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5 "Phone Jack
HDMI Audio sampling frequency up to 192kHz
SPDIF Optical Audio sampling frequency up to 192 kHz
HDMI Audio format: LPCM 2 / 5.1 / 7.1CH, 5.1CH Dolby Digital 2 ~, ~ 2 5.1CH DTS, Dolby Digital Plus, Dolby TrueHD, and DTS-HD Master Audio
Optical Format Audio: 2CH LPCM, Dolby Digital 5.1 CH 2 ~, ~ 2 and DTS 5.1CH
Audio Format L / R: 4 x output Phone Jack format; 7.1 CH Analogue Audio
Power supply included 5V 2A
Specifications: Supported Resolutions: HDMI 1280x720 (720p) / 60Hz
LED Indicators:
- 1 x Power LED
- 2 x Composite Video, S-Video LED
Input Voltage: 100 - 240 AC
Humidity: 10~85% RH
Operating Temperature: 0°C to 45°C (32°F to 113°F)
Storage Temperature: -10°C to 80°C (14°F to 176°F)
Connector A: 1x Composite Video (1 x RCA) Female Input
1x S-Video (4 pin, Mini-DIN) Female Input
Specifications: Connector on First End:1 x DisplayPort Male DisplayPort 1.1 Digital Audio/Video
Connector on Second End:1 x DVI (Dual-Link) Female Video
Specifications: Color: Black
Enclosure Type: Steel
LED Indicators: 1 x Red Power LED
Video Frequency: 50/60Hz
Maximum Digital Resolutions: 1900x1200
Output Signal: DisplayPort
Power COnsumption : 5W Max
Power Adapter Included: Yes
Input Voltage: 110 ~ 240 AC
Input Current: 0.5
Output Voltage: 5 DC
Output Current: 2
Center Tip Polarity: Positive
Humidity: 5% to 90% RH (no condensation)
Operating Temperature: 0 degree C to 70 degrees C (32 degrees F to 158 degrees F)
Storage Temperature: -10 degrees C to 80 degrees C (14 degrees F to 176 degrees F)
Specifications: Approvals: UL 1007, RoHS2
Cable: 28 AWG
Connectors : 2 x DVI F
Contact Resolution: 2 Ohms, maximum
Insulation Resolution: 10 M Ohms, maximum
Resolution: 1920 x 1080