Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Specifications: NOTE: 1. The adapter need for external power adapter to work. 2. When connecting the riser need to turn off your computer. 3. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish.
Specifications: Audio: Yes
Chipset ID: STDP4320
Converter Type: MST Hub
Output Signal: HDMI
Ports: 2
Maximum Digital Resolutions: 3840x2160 @ 30 Hz
Supported Resolutions:
Note: MST shares 21.6 Gbps across all attached displays. Higher resolutions can restrict the available bandwidth with the remaining ports, please see our guideline below for determining an ideal resolution for your setup.
Average resolution bandwidth allocation
1920 x 1080 (High-definition 1080p) @60 Hz - 22%
1920 x 1200 @60hz - 30%
2560 x 1440 @60hz - 35%
2560 x 1600 @60hz - 38%
3840 x 2160 (Ultra HD 4K) @30 Hz - 38%
Note: Exceeding 100% will reduce functionality.
Wide Screen Supported: Yes
Connector A: 1 x USB-C (24 pin) DisplayPort Alt Mode Male Input
Specifications: Cat. 8 RJ45 Tool Less Termination Plug for 40G:
Cat.8 RJ45 connectors are designed to work specifically with Cat.8 Cable, the RJ45 contacts are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable striper to expose the inner conductors. The hosing of the connectors is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Features: Fast charge two compatible devices at the same time with dual USB-C ports
USB-C PD 3.0 enabled, charging an iPhone 14 Pro from 0-50% in 25 minutes† and a Samsung Galaxy S22Ultra from 0-50% in 22 minutes
Access up to 65W when using a single USB-C port or 45W + 20W when using both
Optimized for Apple, Samsung, Nintendo Switch and other compatible devices
Integrated GaN technology provides a high-power, efficient charge that won’t overheat
PPS technology dynamically delivers optimum power to compatible devices
Compact design ideal for home, office, or traveling
Start charging immediately with included USB-C to USB-C cable
Specifications: Power Input Connector: Wall mount with slide on clip for interchangeable plugs (US, EU, UK, AU, and CN)
Input: 100 to 240 VAC, 50-60 Hz
Output: 5 VDC, 1.2A, 7.5W
Output Connector: Barrel center + 0.1" (2.5 mm) ID x .22" (5.5 mm) OD) 0.35" (9 mm) length
Efficiency level: VI
Specifications: RJ45 8P/8C Female port gold-plated contacts Category 5e ANSI/TIA/EIA 568-C.2 performance T568A and T568B Labeling IDC modules (110 or Krone) with covers Compatible with 22-26 AWG Solid wire
Specifications: Cat.8 RJ45 Tool Less Keystone Jack for 40G:
These Cat.8 RJ45 Jacks are designed to work specifically with Cat.8 Solid cable, the contacts on the keystone jack are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable-cutter to trim off excess wire.The hosing of the keystone Jack is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).