Specifications: Converts Parallel ATA to Serial ATA
Supports ATA 100/133
Fit for 3.5" IDE HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector
Package Contents: 1 x bridge board
1 x Molex power cable
Specifications: • Standard 2.5" IDE storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Master and Slave Card Detect, and Disk Activity
• Can be a primary bootable device containing the OS and applications (depends on CF card specifications)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems
• Power supply via IDE interface (44-pin SFF IDE connector, +5V)
IDE Interface
• 44-pin SFF (Small Form Factor) IDE connector
• Supports Ultra-DMA IDE Interface
• Does not support hot swap on the IDE interface
CF Interface
• 2 CF card slots (Master/Slave) supporting CF Type I form factor
• Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate u...
Specifications: Jmicro JM20330 Chipset
Plug & Play and Hot-swapping capability
Automatic SATA 3.0/1.5 Gbps speed negotiation
Serial-ATA 1.0 specification compliant
ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps
Support ATA PIO and UDMA modes 0 to 4
Support 3.5" IDE hard drives and 5.25" optical drives
Ultra low power consumption
Master/Slave mode support
Support Windows 98SE/ME/2000/XP Operating System
Package Contents: SATA to ATA/ATAPI IDE Interface Adaptor
SATA Cable
Power Cable
Specifications: Compatible with 2.5" SSD or HDD
Allows a standard desktop or server without 2.5" bays to accomodate slim SSD or HDD.
Coverts 3.5" drive bay into 2.5" drive bays to support 2.5" based SSD or hard drives.
With Drive Screws and Adapter Case Screws
with SATA data cable and power cable
Package Contents: 2.5 to 3.5 HDD adapter, 18 inch SATA Data cable,6 inch Molex 4Pin to SATA 15pin power cable, screws bag
Specifications: Standard ATA 33/66/100/133, SATA 1.0 Supported OS Any OS that supports ATA and SATA Input 7-pin female SATA data connector 4-pin power connector Output 40-pin IDE female connector to IDE device Power Consumption 78 mA Temperature -20ºC to 60ºC (-4ºF to 140ºF) Humidity 0~90%, Non-Condensing Certification FCC, CE
Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity of up to 6TB.
Backward compatible with USB 2.0/1.1.
DC Power Supply 12V included for 3.5" devices.
On/Off Switch for HDD protection.
Pluy & Play, reliable and stable.