Specifications: Chipset ID: MCT - Trigger 1+
Memory: 16MB SDRAM
USB Pass-Through: No
General Specifications: This USB video adapter uses a Trigger family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a DisplayLink or Fresco family chipset.
Supported Resolutions: Standard (1600 x 1200, 1400 x 1050, 1280 x 1024, 1280 x 960, 1152 x 864, 1024 x 768, 800 x 600) / Widescreen (1680 x 1050, 1440 x 900, 1280 x 800, 1280 x 768, 1152 x 864, 800 x 600)
Connector A: 1 x USB Type-A (4 pin) USB 2.0 Male Input
OS Compatibility: Windows 10 (32/64) / Windows 8 / 8.1 (32/64) / Windows 7(32/64) / Windows Vista (32/64) / Windows XP (32/64)
System and Cable Requirements: One available USB 2.0 port
Specifications: Maximum Resolution: 3840 x 2160
Host Interface: USB 3.0
DisplayPort: Yes
Number of DisplayPort Outputs: 1
System Requirements: Operating System(s):
Windows 8/8.1 (32/64bit)
Windows 7 (32/64bit)
Windows Vista (32/64)
Windows XP (32/64)
Windows 2000 (Aero 3D interface supported)
Specifications: Audio: Yes
Chipset ID: T5-302/MCT
Output Signal: HDMI
USB Pass-Through: No
Audio Specifications: 2-Channel Stereo (48Khz)
General Specifications: This USB video adapter uses a Trigger family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a DisplayLink or Fresco family chipset
Maximum Digital Resolutions: 1920 x 1200 / 1080p
Supported Resolutions:
Widescreen(16/32 bit):
1920 x 1200, 1920 x 1080, 1680 x 1050, 1600 x 900, 1440 x 900, 1360 x 768, 1280 x 800, 1280 x 768, 1280 x 720
Standard(16/32 bit):
1600 x 1200, 1400 x 1050, 1280 x 1024, 1280 x 960, 1152 x 864, 1024 x 768, 800 x 600
Connector A: 1 - USB Type-A (9 pin) USB 3.0 Male Input
Connector B: 1 - HDMI (19 pin) Female Output
Humidi...
Video Resolution: HDMI 2.1 & DP 1.4 enabled 3 monitor KVM switches supports up to 8K@60Hz, 4K@144Hz & lower resolutions, delivering crystal-clear visuals with sharp, detailed imagery. Note: Actual resolution depends on your graphics card, monitors and cables.
Video Resolution: KVM switch 2 Monitors 3 Computers up to resolution support up to 4K@60Hz, and is backward compatible with 4K@30Hz, 1440P@60Hz, and 1080P@60Hz. Brings you realistic visual enjoyment. Note: If you need to output 4K@60Hz resolution, please make sure your HDMI cable, computer and monitor support 4K@60Hz. It is recommended to use a good quality HDMI2.0 cable that supports high refresh rate
Video Resolution: The DP1.4 USB 3.0 KVM switch supports resolutions of 8K@30Hz and 4K@144Hz and is backward compatible. It also features an input for connecting two computers with different resolutions. One device supports 4K@60Hz, the other 4K@30Hz, 1440p@60Hz, or a lower resolution.