Specifications: Connector Types: 1 - IDE 40 pin Male
Connector Types: 1 - SATA Data 7 pin Plug
Connector Types: 1 - SATA Power Plug
Connector Types: 1 - SP4 Male
Enclosure Type: Steel
LBA support: 48-bit
Product Height: 1.02 in [26 mm]
Product Length: 3.98 in [101 mm]
Product Weight: 3.67 oz [104 g]
Product Width: 3.07 in [78 mm]
Humidity: 8% ~ 90% RH
Operating Temperature: 5°C to 80°C (41°F to 176°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Chipset ID: JMicron JM20330
OS Compatibility: OS independent; No software or drivers required
Specifications: Jmicro JM20330 Chipset
Plug & Play and Hot-swapping capability
Automatic SATA 3.0/1.5 Gbps speed negotiation
Serial-ATA 1.0 specification compliant
ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps
Support ATA PIO and UDMA modes 0 to 4
Support 3.5" IDE hard drives and 5.25" optical drives
Ultra low power consumption
Master/Slave mode support
Support Windows 98SE/ME/2000/XP Operating System
Package Contents: SATA to ATA/ATAPI IDE Interface Adaptor
SATA Cable
Power Cable
Specifications: • Standard 2.5" IDE storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Master and Slave Card Detect, and Disk Activity
• Can be a primary bootable device containing the OS and applications (depends on CF card specifications)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems
• Power supply via IDE interface (44-pin SFF IDE connector, +5V)
IDE Interface
• 44-pin SFF (Small Form Factor) IDE connector
• Supports Ultra-DMA IDE Interface
• Does not support hot swap on the IDE interface
CF Interface
• 2 CF card slots (Master/Slave) supporting CF Type I form factor
• Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate u...