Your Browsing History
Holiday Shipping Details & Extended Holiday Returns - Free 30-day Returns
$69.99
Most customers receive within 5-9 days.
Meet Your Seller
waveshare USB Blaster V2 Download Cable Programmer Debuggers, High-Speed FT245+CPLD+244 Solution, Support ALTERA FPGA/CPLD Devices, AS, PS, JTAG Three Download Modes
- USB Blaster V2 Download Cable, compatible with ALTERA USB Blaster FPGA/CPLD programmer. The USB Blaster Download Cable interfaces a USB port on a host computer to an Altera FPGA mounted on a printed circuit board.
- The cable sends configuration data from the PC to a standard 10-pin header connected to the FPGA. You can use the USB Blaster cable to iteratively download configuration data to a system during prototyping or to program data into the system during production.
- It surpports most of the ALTERA FPGA/CPLD devices, Active Serial Configuration devices, Enhanced Configuration devices. It supports AS, PS, JTAG three download modes. Supports 1.2-5V programming voltage. Supports Nios II of embedded processor communication and debugging.
- Hardware Solution--- 1) High speed FT245+CPLD+244 solution, similar download speed as the original ALTERA USB Blaster, with the same operation. 2) Download speed 1-3 times faster than other schemes, such as 68013 or C8051F.
- Supporte
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Key Features
1) Hardware Solution
High speed FT245+CPLD+244 solution, similar download speed as the original ALTERA USB Blaster, with the same operation.
Download speed 1-3 times faster than other schemes, such as 68013 or C8051F.
2) Performance
Supports most of the ALTERA FPGA/CPLD devices, Active Serial Configuration devices, and Enhanced Configuration Devices.
Supports AS, PS, JTAG three download modes.
High-speed, stable, and internal FT245R+CPLD designed.
Supports 1.2 -5V programming voltage.
Supports Nios II of embedded processor communication and debugging.
3) Supported Softwares
Quartus II integrated development environment.
NIOS II IDE integrated development environment.
NIOS II EDS integrated development environment.
4) Supported Devices
Tested devices are listed below, including
but not limited to:
CPLD: MAX3000, MAX7000A/B/S, MAX9000 and MAX II etc.
FPGA: Stratix, Stratix II, Cyclone, Cyclone II, CycloneIII, ACEX 1K, APEX 20K and FLEX 10K etc.
Active Serial Configuration Devices including: EPCS1, EPCS4, EPCS16 etc.
Enhanced Configuration Devices including: EPC1, EPC4 etc.
5) Connects to PC
Computer connection via USB 2.0 interface.
6) Connects to target board
Target board connection via JTAG, AS, PS interfaces.
LED Status
Red LED: Power indicator
Green LED: Signal indicator, the LED is on while downloading/programming
Online Development Resources /User Manuall: //bit. ly/3njOq7l
Package Content
USB Blaster V2 × 1
USB Cable × 1
10-pin cable × 1
Question: USB Blaster is used under Windows, do I need a driver?
Answer: A driver is required, and the driver is provided with the Quartus software. After installing the software, you need to manually load the USB blaster driver in the device manager, see the user manual for details.
1) Hardware Solution
High speed FT245+CPLD+244 solution, similar download speed as the original ALTERA USB Blaster, with the same operation.
Download speed 1-3 times faster than other schemes, such as 68013 or C8051F.
2) Performance
Supports most of the ALTERA FPGA/CPLD devices, Active Serial Configuration devices, and Enhanced Configuration Devices.
Supports AS, PS, JTAG three download modes.
High-speed, stable, and internal FT245R+CPLD designed.
Supports 1.2 -5V programming voltage.
Supports Nios II of embedded processor communication and debugging.
3) Supported Softwares
Quartus II integrated development environment.
NIOS II IDE integrated development environment.
NIOS II EDS integrated development environment.
4) Supported Devices
Tested devices are listed below, including
but not limited to:
CPLD: MAX3000, MAX7000A/B/S, MAX9000 and MAX II etc.
FPGA: Stratix, Stratix II, Cyclone, Cyclone II, CycloneIII, ACEX 1K, APEX 20K and FLEX 10K etc.
Active Serial Configuration Devices including: EPCS1, EPCS4, EPCS16 etc.
Enhanced Configuration Devices including: EPC1, EPC4 etc.
5) Connects to PC
Computer connection via USB 2.0 interface.
6) Connects to target board
Target board connection via JTAG, AS, PS interfaces.
LED Status
Red LED: Power indicator
Green LED: Signal indicator, the LED is on while downloading/programming
Online Development Resources /User Manuall: //bit. ly/3njOq7l
Package Content
USB Blaster V2 × 1
USB Cable × 1
10-pin cable × 1
Question: USB Blaster is used under Windows, do I need a driver?
Answer: A driver is required, and the driver is provided with the Quartus software. After installing the software, you need to manually load the USB blaster driver in the device manager, see the user manual for details.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Detail Driven Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...