Specifications: Provides true plug-and-play capabilities, ready to operate right out of the box.
Works with Windows, Mac OS X, and Linux operating systems. No new driver installation is required.
It is ideal for a wide variety of USB devices, from printers, scanners, and hard drives to audio devices, touch screens, Web cams, and more!
Works with all USB device types: control, interrupt, bulk, and isochronous at up to 480 Mbps.
Get USB connectivity anywhere.
Install your USB devices anywhere! Combine the 4-Port CATx USB Extender with additional USB hubs to connect up to 30 USB devices. An AC power adapter at the remote unit provides up to 1A max to USB port.
Use it for any or all of the following applications:
Industrial control
KVM extension
Digital signage
Remote des...
Specifications: Connectors
Video In: 1 x HDB-15 Male (Blue)
Video Out: 1 x HDB-15 Female (Blue)
Audio In: 1 x Audio Jack Female (Green)
Audio Out: 1 x Audio Jack Female (Green)
Unit to Unit: 1 x RJ-45 Female
Power: 1 x DC Jack
LEDs
Power: 1 (Green)VE170R, VE170RQ
Switch
Manual Gain Control: 2 x Knob (VE170R, VE170RQ)
RGB Tuner: 3 x Knob (VE170RQ)
Cable Distance: 1000 feet (300 m)
Power Consumption
VE170T: DC 5.3V, 0.9W
VE170R: DC 5.3V, 1.11W
VE170RQ: DC5.3V, 4.82W
Video
VE170T, VE170R:
1920 x 1200 at 60Hz, 100 feet(30 m)
1600 x 1200 at 60Hz, 500 feet(150 m)
1024 x 768 at 60Hz, 1000 feet(300 m)
VE170RQ:
1920 x 1200 at 60Hz, 500 feet(150 m)
1280 x 1024 at 60Hz, 1000 feet(300 m)
Specifications: Interfaces
Serial
4 x Programmable Bi-directional RS-232/422/485 Port
(4 x DB9 Male Connector, configurable via pin assignments);
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd;
Flow Control: None (default) RTS/CTS
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A
Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)
Specifications: Signal Types Supported: VGA, SVGA, XGA, UXGA, and Multisync
Video Bandwidth: 350 MHz
Maximum Resolution Supported: 1920 x 1440 at 80 Hz
Maximum Cable Length Supported: 210 ft.
Power Input: 120 VAC 60 Hz
Power Output: 9 VAC, 600mA
Pin Diameter: 5.5mm
Center Pin Polarity: Positive