Description:
HDMI Fiber optic extender provides extension of HDMI video audio signal long distances over one LC fiber optic cable, it support high resolution up to 3840x2160@60Hz,1080P@120Hz . It also supports Remote KVM Control,Bi-directional IR control and HDMI loop out function.The extender can use for a wide range of applications requiring long distance transmission of high resolution with high quality by its good stability and powerful security.
Installation Steps:
Make sure you have all the cables needed, power off the all connected devices including your HDMI video source and HDMI display. Then install in the following order:
- Connect your HDMI source to the Sender's "HDMI IN" connector with an HDMI cable.
- Connect an SM/MM fiber cable to the OPT connector on the Sender unit. Plug one of the included power adapters into the DC power jack of the Sender, then plug the power adapter into any reliable power sources.
- Connect your HDMI display to the Receiver's "HDMI OUT" connector with an HDMI cable.
- Connect the other end of the fiber cable to the OPT connector on the Receiver Unit. Plug the second power adapter into the DC power jack of the receiver, then plug the power adapter into any reliable power sources.
- Power on all the connected devices. Now, the HDMI extender is ready to use.
Built-in ESD protection system:
Make transmission much safer. Perfect hdmi extension adapter for large homes, factories, construction sites, data control centers etc;
Package:
- HDMI extender Fiber transmitter: 1 pcs
- HDMI extender Fiber receiver: 1 pcs
- LC SFP Module: 2 pcs
- USB data cable: 1 pcs
- Power adapter: 2 pcs
- User manual: 1 pcs
| Long range transmission: | up to 20 km over a single-mode/Multi-mode LC fiber optic cable |
|---|---|
| Video resolution: | 480P,720P,720i,1080i,1920*1080P@60/120Hz,4K@30/60Hz |
| Infrared control: | Bi-directional 20~60 KHz IR romote control |
| HDMI Loop Out: | The transmitter with one HDMI loop output |
| Temperature: | Operating:-5 centigrade ~ +70 centigrade |
| Power dissipation: | MAX 3W |
| Humidity: | Operating: 5% ~ 90% |
| Maximum pixel clock: | 600MHz |
| Standards: | HDMI 2.0b; HDCP 2.2 |
|---|---|
| Audio Format: | DTS-HD/Dolby-true HD/LPCM7.1/DTS/DSD |
| KVM Control: | supports remote USB KVM control by keyboard & mouse |
| Video standard: | compliance with HDMI 2.0b and HDCP 2.2 standard |
| Power supply: | The power adapter: DC 5V/2A |
| Dimension: | 104*98*23mm |
| Maximum data rate: | 18Gbps |
| Connector: | HDMI-A |