Specifications: Max Distance: 150 m / 500 ft
Supported Resolutions:
1600x1200 @ 150ft(50m)
1280x1024 @ 300ft(100m)
1024x768 @ 500ft(150m)
The ST1218T 8 Port VGA Video Extender over Cat 5 is designed for use with our ST121 VGA over Cat 5 extension series, offering convenient VGA video distribution at distances of up to 492 feet (150 meters) using standard Cat 5 (or better) cabling.
Comprised of the transmitter unit only, the ST1218T requires one Receiver Unit (ST121R) per display that you are connecting.
For added versatility, the VGA over Cat 5 Repeater (ST121EXT) can be used to extend the distance between the transmitter and receiver by an additional 492-feet (150 meters), for a total distance of 984-feet (300 meters). Similarly, up to 3 repeater units can be used betwe...
Package Contents: VGA Extender Transmitter
VGA Extender Receiver
VGA Cable
3.5mm Cable
3.5mm to IR Receiver Cable
3.5mm to IR Blaster Emitter Cable
RS-232 to 3.5mm Adapter Cable
AC Power Adapter (x2) (5V / 2A)
User Manual
Type: VGA Video + Audio with RS-232 Serial and IR Control over IP Transmitter
Max Extend Distance: 328 feet
Color: Black
Specifications: Extends and Distributes VGA Video + Audio, Serial and IR Control Signals over Cat5/6 Cabling
Converts source video to IP-based signal transmitted to and distributed through network switch
Extends signal up to 328 ft. (100 m) from switch
Can also connect directly to receiver up to 328 ft. away
Designed for Managed Network Switches with IGMP
Allows login and remote management via switch interface
Display single source on single display or distribute single signal to multiple displays
Video source can be sent to any analog or digital display, including HDMI and DisplayPort
Connect up to 64 transmitters and 255 receivers in single managed switch installation
HDMI output for connecting a local display
Enhance...
Specifications: Standards and Certifications:
HDCP 1.1
DVI 1.0
CE
FCC
RoHS2
Signal Input/Output:
Input video signal: 0.5 – 1.0 V p-p
Input DDC signal: 5 V p-p (TTL)
Maximum single-link range: 1920 x 1200, 1080p
Output video: HDMI 1.3, HDCP 1.1, DVI 1.0
Frequency: 1.65 Gbps / 165 MHz
Video Resolutions:
VGA: 640 x 480, 800 x 600, 1024 x 768, 1920 x 1200
DTV/HDTV: 480i/480p/576i/576p/720p/1080i/ 1080p
Specifications: Extends and Distributes HDMI/DVI A/V, Serial and IR Control Signals over Cat5/6 Cabling
Converts source video to IP-based signal transmitted to and distributed through network switch
Transmitter and receiver each extend signal up to 328 ft. (100 m) from switch for maximum distance of 656 ft. (200 m)
Transmitter and receiver can also connect directly without switch up to 328 ft. apart
Designed for Managed Network Switches with IGMP
Allows login and remote management via switch interface
Connect up to 64 transmitters and 255 receivers in single managed switch installation
HDMI output on transmitter for connecting a local display
Enhanced Technical Features
Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
Uses H.264 video compression standar...
Specifications: Signal Types Supported: VGA, SVGA, XGA, UXGA, and Multisync
Video Bandwidth: 350 MHz
Maximum Resolution Supported: 1920 x 1440 at 80 Hz
Maximum Cable Length Supported: 210 ft.
Power Input: 120 VAC 60 Hz
Power Output: 9 VAC, 600mA
Pin Diameter: 5.5mm
Center Pin Polarity: Positive