Specifications: Size: 4cm x 3.5cm x 2.1cm
Length:0.8meters(2.62 FT)
USB Power Supply :3.3V
Type: RJ45 splitter with shielded, suitable for Cat 5 / Cat 5e / Cat 6 / Cat 7
Ports: 1 female to 2 female adapter (8P8C)
Features: • Converts a PCIe slot into a 2.5G Ethernet port
• Supports 802.1Q VLAN Tagging
• Includes standard and low-profile brackets
• Windows® support
• Supports WPI (Wake Packet Indication) and LTR (Latency Tolerance Reporting)
• IEEE 802.3ab and 802.3bz compliant
• Supports up to 9KB jumbo frames
• NDAA / TAA compliant (U.S. and Canada only)
Features: • Converts a PCIe 3.0 x4 slot into a 10G Ethernet port
• Supports connection speeds of 10Gbps, 2.5Gbps, and 1Gbps
• Supports 802.1Q VLAN Tagging
• Includes standard and low-profile brackets
• Windows® and Windows Server® support
• IEEE 802.3an and 802.3bz compliant
Specifications: Size: 4cm x 3.5cm x 2.1cm
Length:0.8meters(2.62 FT)
USB Power Supply :3.3V
Type: RJ45 splitter with shielded, suitable for Cat 5 / Cat 5e / Cat 6 / Cat 7
Ports: 1 female to 2 female adapter (8P8C)
Specifications: 1000mbps ethernet cable splitter 1 in 3 out solving the problem of insufficient cabling. It can split one ethernet port into three, allowing three devices to share a single ethernet line at the same time, easily simplifying and expanding your network settings
Features: High-speed ethernet splitter provides up to 1000mbps transmission speed, stable signal transmission between cables without interference. Using ethernet port splitter to experience faster file transfer, smoother online gaming and seamless streaming.
1000mbps ethernet cable splitter 1 in 3 out solving the problem of insufficient cabling. It can split one ethernet port
Features: • Supports MoCA 2.0 over coaxial cables
• Backward compatible with MoCA 1.1/1.0 standards
• 1 x MoCA Coax: F-Type Female coax input
• 1 x TV Coax: F-Type Female coax output
• 1 x RJ-45 Gigabit LAN port
• Supports up to 16 nodes on one network
• Supports net throughput of up to 1Gbps
• Designed to connect Ethernet devices to an existing
Specifications: Simply pull the connector down over the cable jacket so that the insulated wiring goes through nose of the plug.
Inspect the wiring prior to crimping the connector. It's done in one step with the EZ-RJ45 Crimp Tool.
Make faster terminations and reduce wasted crimps and scraps.
Backward compatible with CAT5e and CAT3