Question 1

how to get them into the case, the front panel? (i know where they go on the motherboard )

Accepted Answer

You need to remove both sides of the case and then the front bezel. On the cases I have had there are little tabs down the front bezel you push to remove it from the frame.  Once that is out of the way you will have access to the switches you want to replace. They can be a bit tricky to insert, so use care not to break off a tab on the new switch. If you break one you can wrap tape around the switch until it fits snug into the opening. I hope this helps.

Question 2

How long is this cable?

Accepted Answer

It has been a while, but it was long enough to reach my power button position on the case.  You could always splice two wires into whatever length you need, if it's not long enough....

Question 3

I have an acer slimline desktop computer, is this switch compatible?

Accepted Answer

These switches are wired to the cables.   If your old case switches are about 8mm square, these might fit.   I'm using these on my test computer that is in the open, so the switches are in free air.

If it were me, I would probably get them, as they are inexpensive, and there's a pretty good chance they might work for you.

Question 4

Will this wire kit fit any ATX case or is it specific to certain models?

Accepted Answer

The wire kit is noted for its versatility and compatibility with various case types, making it suitable for both standard and custom setups.

Question 5

What is the length of the wires in this kit?

Accepted Answer

The product length is 20 inches (508 mm).

Question 6

What colors are the LED indicators in this kit?

Accepted Answer

The LED indicators in this kit are green for HDD Activity, green for Power, and yellow for Sleep.

Question 7

Is it easy to install the StarTech.com BEZELWRKIT?

Accepted Answer

Yes, the kit is praised for its ease of installation.

Question 8

How many switches and LEDs are included in this kit?

Accepted Answer

The kit includes two switches (Power and Reset) and three LEDs (Power, Hard Drive Activity, and Sleep).

Question 9

How do you know which wire is positive on the LEDs?

Accepted Answer

It's usually the side that has an arrow or triangle on it.

Types	Lighting & Decor
Colors	Black
Length	0 ft.
Specifications	Motherboard Connectors: Power LED(3-pin) Sleep LED(2-pin) HDD LED(2-pin) Power Switch(2-pin) Reset Switch(2-pin) Product Length: 20 in [508 mm] Switches: 1 x Power 1 x Reset LED Indicators: 1 - HDD Activity (Green) 1 - Power(Green) 1 - Sleep (Yellow)

Best Sellers

StarTech.com BEZELWRKIT Replacement Power Reset LED Wire Kit for ATX Case Front Bezel

Learn more about the STARTECH BEZELWRKIT

Customer Reviews of the STARTECH BEZELWRKIT

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Model
Brand	StarTech.com
Model	BEZELWRKIT

Item#: N82E16811993022