Specifications: Material: Plastic outer shell
Output limitation (each port):
Addressable RGB port: 72 LED per port, total 5V, 5A
Fan Port : total 12V, 3A
Color Selection: Support 2812 IC Addressable RGB LED
Signal output:
Standard Addressable RGB 3pin + 4-1pin x 6*
Fan 4pin port x 4 (compatible with 3pin)
Included Parts:
6 x Standard Addressable RGB cable
1 x Peripheral power Y cable
1 x RF remote
1 x Thermal sensor cable
1 x Power switch cable
Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Material: 18 pcs 5050 RGB LED with magnetic strip and adhesive tape
Pin definition: +12V, G, R, B
Included Parts:
RGB LED strip x 2
Y cable x 2
Length: 300mm
Wattage: 1.44W (12V, 0.12A)
Tandem limits: 5 pcs on each line
Weight: 30g
Specifications: Screw 6-32 x .25": Used in PC case cover and I/O plates
Screw 6-32 x .15": Used to install hard drives
Screw M3 x .25": Used to install floppy drive, CD-ROM drive and motherboard
Screw 4-40 x .18": Used in I/O plate connector
Metal Jackscrew Standoffs 6-32 to M3: Used in motherboard installation and pre-taped PC chassis
Metal Jackscrew Standoffs 4-40: Used in I/O plate connector
Case fan screw: Used to install plastic-framed cooling fans to PC chassis
Nuts 4-40 x 6 mm: Used in joining cables
Nuts 4-40 x 1.6 mm: Used in screw 4-40
AT-style PC Case Standoffs: Used to install motherboards to a PC chassis
Pre-Trapped PC Case Standoffs: Used to install motherboards to a pre-trapped PC chassis
ATX-style PC Case Standoffs: Used to install motherboards to a PC chassis
Case Dimension...
Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
M/B Adapter: Digital RGB adapter 3pin (+5V,Data,NA,GND)
Input Voltage: +5V
Current (Single strip): Max. 0.84A
Current (Dual Strip): Max. 1.68A
Wattage (Single strip): Max. 4.2W
Wattage (Dual Strip): Max. 8.4W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 28 LEDs (400mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 400 x 13 x 5.5mm (15.7 x 0.5 x 0.2in)
Scope of Delivery:
2 x 400mm (15.7in)...
Specifications: IMPORTANT NOTE: This vertical graphics card holder kit is designed for standard ATX chassis with at least 7 available PCI slots & You need to GIVE UP the access to these 7 PCI slots at the back panel of your chassis.