Specifications: Meets or exceeds industry standard Category 6/Class E according to TIA/EIA 568B 2.1 and ISO/IEC 11801 2nd edition.
110/KRONE IDC vertical punchdown termination for 22-26 AWG UTP solid wire.
Balances signal transmission of insertion loss and crosstalk from 1 to 250 MHz.
Complies with FCC Part 68.
Color: Silver.
Size: 2.5in x 0.75in x 0.75in.
Weight: 0.040lbs.
Specifications: Features 48 CAT6 RJ-45 to RJ-45 feed-through ports.
Meets Category 6 performance requirements.
Cable management bar helps support cables attached to the rear of the panel.
Specifications: Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet
Auto MDI/MDI-X
UTP port auto-senses network speed
Switch selectable half or full duplex operation on the fiber port
Fiber lengths up to 2Km
2 Power Choices - AC-DC Adapter or USB
5 LED Function lights
Uses 62.5/125 or 50/125 Multimode cable
Wavelength: 1310nm
Supports Link Fault Pass-through (LFP) for easy tracing of network link failures
Interfaces/Ports:
1 x RJ-45
1 x ST Duplex
Connectivity:
UTP
Fiber
Connectivity Media:
10/100Base-TX Category 5 UTP
10/100Base-TX Category 6 UTP
100Base-FX 50/125 µm Multi-mode Fiber
100Base-FX 62.5/125 µm Multi-mode Fiber
Package Contents:
N784-001-ST UTP to Fiber Media Converter
10/100 Media Converter, UTP - ST
AC-DC Power Adapter ( 100-240V )
Owner's Manual
Specifications: Tripp Lite's Cat6/Cat5e 110 Style Punch Down Keystone Jacks provide maximum flexibility for any UTP Ethernet environment. Ideal for Cat5e cabling environments, the jack also meets UL-certified ANSI/TIA/EIA-568-B.2-1 Permanent Link/Channel Identification Test for Category 6 cabling installations. The uniquely patterned printed circuit board construction is designed to meet CAT6 250Mhz performance, and is fully compliant with EIA/TIA CAT6 connecting hardware specifications. With its compact casing, it fits into any conventional face plate, outlet box, or panel. It also features dual-color coded labeling made for both 568A & 568B (258A) wiring schemes.
Specifications: Universal wiring.
IDC contacts are phosphor bronze with tin plating.
Labeled with both T568A and T568B wiring schemes.
Nose contacts feature 50-micron gold plating over 100-micron nickel underplating.
Make easy terminations using a 110 tool.
The termination retention stuffer cap provides strain relief while enabling you to easily check terminations.
Feature a keystone style for snap-in installation.